Position: The general switch is opened and closed with one hand in the opposite direction, and the left hand is left with the right hand. Therefore, most of the switches in the home are installed on the left side of the door, so that it is easy to open with the right hand after entering the door. In line with the logic of behavior. However, this situation has a premise, and everyone must ensure that these premises are established: 1. The opening direction of the entrance door adjacent to the switch is the right side. 2, the height of the furniture before the entrance switch (the problem needs to pay attention to the home, the kitchen cabinet, five buckets, etc., not wider than the switch or higher than the switch, which is inconvenient for daily use.) 3, the general entrance switch is recommended to use the prompt light, for the convenience of night use. Otherwise the wall on the side of the switch will be dirty for a long time. And groping for the lights, always put a lot of psychological pressure on the timid MM. The multi-connector switch is a switch that has several buttons on the switch to control multiple lamps. 1. When an electrician is required to connect multiple switches, there must be a logic standard, or one by one in accordance with the order of the lamp orientation. 2. If the kitchen exhaust switch is also connected to the multi-connector, it will be placed in the last one. The switch of the middle control light should not be tripped. This function is separated, and it is easy to remember when it is turned on later. Otherwise it is often to find the light you want to turn on and turn all the switches on. Dual control or three control switch: This kind of switch is very useful. When both of you are watching TV on the bed, and in order to decide who is going to get off the ground and arguing, the dual control switch can solve this problem. There are also places that are often used: between the kitchen and the living room, the living room has two sides on the inside and outside of the balcony, etc., all of which depends on everyone's living habits, so think more when you think about it. Concerned about surprises Label: Precautions for switch socket layout in home decoration Previous: Hardware locks purchase point of view analysis Next: Lock maintenance small coup
InVent PS 3 – a series of Monodisperse Reversed
Phased Polymeric Resin designed for the polishing purification and separation
for pharmaceuticals and natural products. These resins have perfect
spherical shape and high uniformity of particle size. It also shows an excellent stability in
organic solvent, strong acid and base system, easy
column packing, high resolution as well as a good tolerance to high salinity, without
any tailed peak caused during the separation for alkali compounds.
3 Micron Monodisperse Resin Invent 3 Micron Monodisperse Resin Invent,3 Phase Cast Resin,3 Micron Monodisperse Resin,Monodisperse Resin Nanjing Genshine Bio-technology Co., Ltd , http://www.genshine-bio.com