Geotextile-
woven and nonwoven Geotextile
Geotextiles are available as woven and non-woven .As liner protection, against physical damage, the non wovens are normally the answer.They are made up of fibers of polyester or polypropylene in random directions and punched together by needles during the manufacturing process.Geotextiles are commonly used to separate layers like clay and drainage and to protect liner from damage.
Geotextile is a non-woven product manufactured by combinining synthetic short yarns mechanically by using needling method. Non-Woven Geotextile has no woof and warp. Strength is achieved by combining yarns and applying thermal process. Geotextile felt is a permeable textile product which can be used with basic elements or with any material related with soil, running ground or geotechnic engineering.
Part Four: Certification
Shipping:
Services
Part Seven: Contact
Geotextile Geocomposite Geotextile,Polyester Non Woven Geotextile,Polyester Needle Punched Nonwoven Geotextile,Compound Geomembrane Geotextile Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com
Each technology subsystem performs tasks in different scopes, such as CCTV monitoring systems to complete video transmission, display and storage. Each subsystem integrates these functions into a high-level application platform. When the high-level integration platform processes the same alarm event, the different subsystems work together at the same time. The command center will establish a unified control platform that integrates the functions of each functional subsystem. This is a platform for management center applications. The construction of the command center has experienced three stages: the construction of a single subsystem, the uniform control of each subsystem by the center, but the independence of each subsystem and the integration of the command center system. At present, the system integration stage has been developed. It is possible that various information management or technical subsystems may be constructed using different technologies, but the interface specifications should be complied with, so that after the system is completed, the command center can work on different subsystems under a unified operation interface. Coordination linkage.
The integration function is to establish a technical route. In the command and dispatch integration system, an interconnection and interconnection mechanism can be established with the power system management data center and the technical subsystem to realize the function of collecting information from these systems, thereby collecting the subsystems. Information. The established business subsystems such as security monitoring, access control, intelligent analysis, and unattended system are the four business systems of power management. These business systems continuously generate business data during daily operation, and become transformed after being extracted and processed. The business information of the electrical management department, which will be stored in different business systems, and provide information services to other business departments through different query systems. The integration function of the electronic map integration platform can be reflected in the control platform of the dispatch center in real time. After the electronic map integration platform is built, the information generated by these systems will be integrated into the system, and the system will provide users and applications externally. Information service.
After the information of each subsystem passes through the integrated link and is collected into the system, the system completes the security monitoring function of each substation by the power department. Monitor the power security situation within the scope of the jurisdiction, and notify the management center of the alarm and prompts when an abnormality is found. Therefore, the integration function is to allow the power management department to see various information related to power safety management.
2, scheduling function
When an alarm event occurs, the management center can use the control platform to dispatch relevant personnel, facilities, and fire rescue through the relevant departments. At the same time, the system records the whole process of scheduling, and can be played back afterwards and evaluated by experts. Reasonable command and dispatch can be stored as a plan, and can be referenced when similar events occur later. The command and dispatch function is based on the integrated function, and the control commands of the management center can reach the technical subsystems and related personnel.
3, electronic plan function
Establish an electronic plan system When an alarm event occurs, the management center can refer to the plan for correct command and dispatch. By processing data in the data center power management, it provides auxiliary decision-making functions for power security management. The traditional text-based paper plan is digitally abstracted, combined with accident consequence simulation analysis, GIS map, power emergency protection and other systems to solve the problems of storage, management, upgrade and inconvenient use of traditional paper plans. The system can extract information elements according to the text emergency plan, including the four tasks of the plan (prevention, preparation, response, recovery) and the resources of each task, and then form the basic information unit of the emergency command. The system can quickly formulate various emergency rescue plans. Dynamically load data generation command system and task list to support fast response.
4. Graphical management of geographic information
The power remote integrated video surveillance system is a multi-branch system involving microstructures and macro systems. A large number of macro-related events have spatial distribution characteristics. However, it is very inconvenient to use this spatial information in actual work to serve emergency command and decision. It is either marked on a paper map or it is difficult to find a suitable map. It is inefficient and difficult to update and maintain. When the amount is large, it is more difficult to carry out. In addition, graphical data and attribute data are inconvenient for interaction and correlation analysis.
Made from PP(polypropylene) or PET(polyester) fiber
by nonwoven needle punched manufacturing process. It has function of isolation, filtration,
drainage, reinforcement, protection and maintenance etc.
Part Two: The Specification of non woven geotextile
Weight
100g/m2-600g/m2
Length
50m/roll,100m/roll,150m/roll or
as your choice
Width
2.0m-8.0m or as your choice
Color
White/Black mainly White
Material
PET, PP
Delivery port
Qingdao
Package:
woven bag or as customers'
requests
Product time
2-20 days
Note
We can do as your demand,
please feel free to contact us for more information
Part Three: The Application of non woven geotextile
1 Separation
The isolation of the railway dregs and the roadbed, roadbed and the soft
base, surface of the airdrome and parking lot and the groundsill, different dam
materials. It isolates the soil and the gravel of two kinds different
granule pathway from the groundsill or other
buildings.
2 Reinforcement
The highway, railway, soil-stone dam, breakwater, airport, backfill soil of
retaining wall, slope protection, etc in which distributes the earth stress,
prevents the side-displacement of the earth body and improves the earthbody
stability.
3 Protection
It prevents the bank from being washed out, protects the bank and the bottom, prevents the water and soil from being
washed away
Part Four: Specification
Weight
100g/m2-600g/m2
Length
50m/roll,100m/roll,150m/roll or
as your choice
Width
2.0m-8.0m or as your choice
Color
White/Black mainly White
Material
PET, PP
Delivery port
Qingdao
Package:
woven bag or as customers'
requests
Product time
2-20 days
Note
We can do as your demand,
please feel free to contact us for more information
ISO9001:2000 International Quality System
Certification,
ISO14001:2004 Environment Management System
Certification GB/T28001:2001 Vocational Health and Safety System Certification.
Besides, our company has successfully passed on-site check on production
license, and has gained "National Industrial Product Production
License" and water-proof qualification. We have been the member of Chinese
Technical Association on Geosynthetics and have been recognized as a
"Provincial-level Enterprise Abiding by The Contract, Keeping
Promise" for several successive years and so on.
Part Six: Other information
7 days after receive the advance payment
1.We can provide free factory similar sample and
delivery charge at your side
2.We can make sample with your design proposal at
your cost. we can provide matched die-cutting document for your designing use
in advance.
3.The sample can be ready right after we have
discussed the processing details and confirm your payment for it in 4-7 work
days. it may be extension for some special or complicate ones.
Introduce four functions of substation monitoring system
[ Huaqiang Security Network News ] Explain the four major functions of the four substation monitoring systems: 1. Integrated functions, 2. Scheduling functions, 3. Electronic plan functions, 4. Graphical management of geographic information. 1, integrated function
