1. Made from FDA approved and LFGB food grade Nylon.
2. Locking in the closed position makes these tongs easy to store.
3. Safe for non-stick cookware and perfect for not scratching your pots and pans.
4.Dishwasher safe for simple cleaning
5.Let you easily serve pasta, meats and vegetables from platters and more
Nylon Headed Metal Kitchen Tongs Serving Tongs,Cooking Tongs,Metal Tongs,Nylon Headed Metal Kitchen Tongs BOHAO ENTERPRISE CO., LTD , https://www.yj-bohao.com
Instructions for use of fire protective clothing
Fire-fighting chemical protective clothing is one of the protective clothing for firefighters. It is used by firefighters to protect themselves from chemical dangerous goods or corrosives during fire fighting and rescue operations at the fire and accident sites where dangerous chemicals and corrosives are present. Protective clothing worn by materials.
The main protective tape of the fire protective clothing is made of brocade with flame retardant and viscous treatment, and double-sided coated with flame retardant and anti-chemical surface glue. The main adhesive tape only produces carbonization when in contact with fire, and it can maintain good strength without insoluble drops. The main body tape is made into a garment body and gloves through a laminating-sewing-striping process, and is equipped with a flame-retardant, voltage-resistant, anti-puncture shoe or a rubber boots to form a complete garment.
First, the method of use
(1) Prerequisite wear a chemical protective suit requires a co-wearer, first open the neck, chest, and feet of the garment into the trousers, lift the trousers to the waist, and then extend the arms into the two sleeves, and then The cuff loop is placed over the thumb.
(2) After folding the top bra, pull over the chest and cover it tightly, and then fasten the front chest.
(3) After the belt is tightened, the white buckle is fastened.
(4) After putting the fire mask on, put the head cover on the head and put the big white buckle on the neck buckle.
(5) Finally put on the gloves and press the inner sleeve into the glove.
(6) The wearer helps the wearer to carry the breathing apparatus and connect the demand valve to the mask according to the requirements of the breathing apparatus instruction manual, and activates the breathing apparatus.
(7) Adjust the protective suit to the most comfortable state by adjusting the strap of the breathing apparatus. Take out any unused things in the chemical protective suit.
Second, the use of precautions
(1) Fire-fighting chemical protective clothing shall not be in direct contact with flames and melts.
(2) Before use, the garment must be carefully inspected for damage. If it is damaged, it is strictly forbidden to use.
(3) When using, it must be noted that the hood and the mask of the mask are closely matched, and the neck buckle and the big white buckle of the chest must be fastened to ensure the neck and chest are airtight. The belt must be tightened to reduce the "window effect" during exercise.
(4) After each use, wash with soapy water or 0.5-1% sodium carbonate aqueous solution according to the soil condition, then rinse with water, put it in a cool and ventilated place, and dry it and pack it.