Elevator wireless monitoring What are the requirements for wireless bridges?

<

The rapid development of science and technology, more and more applications of wireless monitoring in all corners of society, people's lives have become intelligent. Elevators have become an indispensable tool under the rapid economic development. Regardless of whether it is in commercial buildings, living quarters, or school campuses, the use of elevators is very common in bringing convenience to people, and an endless number of safety accidents have also caused people's concerns. At the same time, it has brought convenience to criminals. Therefore, elevators Wireless monitoring is also a very important measure.
Because the elevator is a very complex environment, the ordinary cable monitoring is accompanied by the elevator up and down, the cable is easy to wear, it is easy to affect the monitoring, and increase the cost of maintenance, resulting in a lot of inconvenience. The elevator environment adopts the wireless method, and many ordinary projects are easily subject to interference.
The common disturbances in the elevator environment include the electromagnetic radiation of power, lighting, fans, control, and communication cables, as well as interference from ultra-low-frequency power sources, electrical machine sparks, inverter motor interference, control signal interference, etc., which are below tens of kilohertz. interference. Ordinary wireless bridges are as fragile as outdoors, but they are not always in the elevator.
Based on the above reasons, Fengrunda, an excellent transmission product & service provider, designed a special elevator wireless bridge for the unique environment of elevators. Such as 2.4G S300 wireless bridge, 5.8G S400 wireless bridge and so on. Designed specifically for elevator monitoring, it easily meets the monitoring transmission of 5- to 100-layer 1080P cameras, highlighting the strong security capabilities.
Elevator monitoring not only has the requirements for the stability of video transmission, but also has the requirements for ease of installation and simple maintenance. Because the elevator environment is different from the general spacious environment, it is very inconvenient for the construction or installation to be too complicated. At the same time, in order to avoid causing secondary radiation interference, the transmission power must be small. Therefore, the elevator wireless bridge monitoring device must be selected for easy installation, power and transmission stability, and low transmission power. The Fengrunda elevator series wireless bridge meets the above requirements.
The appearance of these bridges is aesthetically pleasing, requires no configuration, is simple to use, and supports PoE. The transmitter is placed on the top or bottom of the car. The receiver is placed on the upper part of the patio or the bottom of the pit. Signals are transmitted wirelessly between the transmitter and receiver. Transmission, the received video signal is sent to the monitoring room through the video cable, and the management personnel can monitor the running status in the elevator in real time.

Dye is an organic substance that enables the coloring of fibers and other materials. Dye a wide range, according to the source can be divided into natural dyes (such as plant dyes, animal dyes and mineral dyes, etc.) and synthetic dyes (or artificial dyes). According to the molecular structure can be divided into azo dyes, anthraquinone dyes, phthalocyanine dyes, aromatic methane dyes, nitro dyes and so on. According to the application method is divided into acid dyes, alkaline dyes, sulfur dyes, reactive dyes, disperse dyes, direct dyes and so on. Dye has a color, but the color of the material is not necessarily a dye. Dyes must have chromophores and help chromophores. The dye in the ink should also have a water-soluble group such as a sulfonic acid group.

Natural dyes are dyes obtained from animals, plants and minerals. According to the source can be divided into: â‘  plant dyes, from some plants roots, stems, leaves and fruits extracted from the dye, such as extracted from indigo indigo (blue), extracted from turmeric curcumin (yellow (Dinar), etc.); (d) dyes, extracts from the animal's body, such as carmine extracted from the cochineal, etc .; (d) mineral dyes, dyes extracted from the colored non-ferrous minerals of minerals , Such as chrome yellow, ultramarine, manganese brown and so on. Because of the natural dyes and artificial dyes compared to the existence of many shortcomings, such as incomplete chromatography, application inconvenience, poor fastness, in addition to a few still use, the majority was eliminated.

Synthetic dyes, also known as "artificial dyes". Mainly by the coal tar (or oil processing) fractionation products (such as benzene, naphthalene, anthracene, carbazole, etc.) by chemical processing, sometimes called coal tar dyes. As the first few kinds of synthetic dyes made of aniline as raw materials, it is also known as "aniline dye." Compared with natural dyes, synthetic dyes and more types, chromatography complete, most colorful, washable and durable, and can be mass production. So the current so-called dye almost all refers to synthetic dyes. The dyeing products are one of the common forensic materials.

Pigment is a colored, black, white or fluorescent particulate organic or inorganic solid. In water, oil or other application medium does not dissolve, but can be evenly dispersed, and in the entire dispersion process from the physical and chemical effects of the media, still retain its unique crystal or particle structure. According to the chemical composition of inorganic pigments and organic pigments; according to the color is divided into white, red, yellow, black and other pigments; according to the source is divided into natural and synthetic pigments, natural pigments are mineral (inorganic) such as He Shi, cinnabar, , Realgar, etc., there are animal and plant (organic) such as rattan, cochineal red, synthetic pigments are also inorganic and organic two categories; according to the use of coloring pigments, physical pigments and functional pigments. Coloring pigments are inorganic and organic pigments that impart various colors to the application medium. The pigment is a pigment that does not have a hue force and no hiding power. It is mainly used to reduce product cost and improve the performance of paint, plastic, rubber and other products. Called the filler. Now has been processed into ultra-fine grain of natural products and synthetic products, due to the synthesis of impurities in the small, fine particles and according to the need for artificial synthesis and a variety of surface modification, it can be used to reduce the hiding power of the pigment (Such as titanium dioxide) and improve product performance, and now it is called physical (incremental) pigments more appropriate, most of the main varieties of natural pigments are processed natural minerals such as natural calcium carbonate, barite powder, talc Such as precipitated calcium carbonate, precipitated barium sulfate, synthetic silica, etc .; functional pigments are pigments that give products specific functions, And change the color of the temperature paint, with poisonous biological function of the antifouling pigments, in the dark glowing luminous pigments, to prevent corrosion of rust-proof paint, pearl luster pearlescent pigments and so on.

Paint in paint, printing, rubber, plastics, paper, fiber, ceramics and other industries widely used, the product can be decorative, opaque, durable or special features.

Dyestuffs And Pigments

Dyestuffs And Pigments,Chinese Herb Extracts,As Acid Dyes,Stabilizer Of Plastic Products

SHANDONG ZHISHANG CHEMICAL CO.LTD , https://www.zhishangchemical.com