Nowadays, more and more families will use wood flooring in their renovations. However, the installation methods of wood flooring are getting more and more important. Good use of good materials will have icing on the cake, otherwise it will be wasted. Therefore, the installation of wooden floors is very important. Next, Xiao Bian introduced the preparation work before installing the floor. Preparation before installing the floor 1, detect the ground water content Before installing the floor, you can measure the moisture content of the ground. If the ground water content is too high, the floor can easily absorb water and expand, causing problems such as arching and noise. 2, check the flatness of the ground To check whether the ground is flat, you can use a 4mm thick ruler to check the formation of the ground, if it is not qualified, the ground is uneven, need to use a blade to flatten, if the flatness is not up to the standard and paving, it will cause floor collapse, warping , arching, noise and other issues. 3, check whether the ground is solid You can tap on the ground with a hammer to see if there is a hole. If there is an empty hole to come out of the ground again, or if the floor is laid for a period of time, the ground will not be firm enough to cause a sound. 4, check the environment whether there are termites Before laying, carefully inspect the room for termites, otherwise the wooden mouth in the room will be seriously damaged. 5, to avoid cross-mixing operations The laying of the floor shall be carried out after the acceptance of other works, otherwise cross-working may easily cause problems such as floor damage. 6, whether to do a good waterproof Waterproof measures are necessary. If the floor is immersed in water, problems such as degumming, deformation, air bubbles, etc. can easily occur. 7. Covert Project Consultation and Labeling Before installing the floor, the industry mainly marked the location of the concealed works in the interior to avoid damaging the pre-buried water pipes and gas pipes during construction. Editor's summary: The preparatory work for installing the floor was introduced here, and I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information. Install floor Pvc Resin is easy to process, and can be processed by molding, lamination, injection molding, extrusion, calendering, blow molding and other hollow methods. Polyvinyl chloride is mainly used to produce artificial leather, film, wire sheath and other plastic soft products, but also can produce plates, doors and windows, pipes and valves and other plastic hard products. Pvc Resin,Pvc Resin Powder,Pvc Resin Sg5,Pvc Resin K67 Henan Shunbang Chemical CO.,Ltd , https://www.pvcresinchemical.com
