The latest hydropower contract model does not look regret! ! !

<

There are many owners of water and electricity are contracted to others to do, then you will think of what the contents of hydropower contracting? Need to sign a contract? Today, Xiao Bian will give everyone a detailed model of the hydropower contract . The contents of the contract are everything. I hope to help you.

Hydropower contract model

Party A: __________ (Employer)

Party B: __________ (contractor)

On the basis of equality, voluntariness, and consensus, both parties A and B reached the following agreement on the hydropower project of Party A on the basis of mutual trust.

Article 1: Project Overview

1. Project location: __________

2. Project contracting methods: a contractor's contracting and contracting; b contractor's contractor's part; c contractor's contractor's cleaning.

3. Duration _____ years _____ months _____ days to _____ years _____ months _____ days

4. Contract price: The budget of this project is RMB ___________ (uppercase). If you want to change the construction content, change the materials, and calculate the project cost according to the actual cost.

Article 2: Agreement on Material Supply

1. The materials supplied by Party A in this project shall be qualified products that meet the requirements, and shall be delivered to the site on time. Party B shall go through the acceptance procedures. If quality problems occur or the specifications are different, Party B shall promptly submit to Party A a written proposal. The party still said that the use of the resulting project losses, the responsibility borne by Party A. After the materials supplied by Party A arrive at the site, Party B shall take charge of the inspection and acceptance by Party B. Party B shall be responsible for compensation for losses caused by improper storage.

2. The decoration materials supplied by Party A shall be used in this project and shall not be used for other purposes without the consent of Party A. If Party B violates this provision, it shall be compensated to Party A twice in accordance with the price of the materials.

3. If the materials supplied by Party B do not meet the quality requirements or the specifications are different, they shall be prohibited from use. If Party B has been responsible for the losses caused by the use of the project. If the materials provided by Party B are fake or inferior products, they shall be compensated to Party A twice the price of the materials.

Article 3: Agreement on Project Quality and Acceptance

1. This project shall strictly implement the national "Code for Construction of House Decoration Engineering" GB-2001 and "Code for Quality Acceptance of Building Decoration Engineering" GB-2001 and refer to other local standards and quality assessment acceptance standards.

2. Due to the technical problems caused by Party B's poor technology and lack of responsibility, etc., its rework costs are borne by Party B.

3. Project completion: Party B shall inform Party A of acceptance in advance and go through the acceptance procedures.

4. The project is designed and constructed by the _______ party.

Article 4: Agreement on on-site management of fire prevention in production safety

1. Strictly abide by the prescribed decoration and construction time, reduce construction noise, and reduce environmental pollution.

2. Without the consent of Party A and the approval of relevant departments, the original building structure and various equipment pipelines shall not be arbitrarily dismantled during construction.

3, to ensure that the site is neatly decorated, sanitation and cleaning work before the completion of the work.

4. Party B shall cooperate with Party A in the safekeeping of the construction materials, and it is forbidden for the personnel to enter the site.

5. Without the permission of Party A, Party B shall not carry any decoration materials provided by Party A to go out. Once found, theft will double the compensation for the price of materials.

Article 5: Project Payment Methods, Contract Contents, and Settlement Agreements

1. After the layout is completed, 50% of the project payment will be paid to Party B, and 30% of the project payment will be paid after the completion of the completion of water and electricity, and 20% will be paid after the completion acceptance.

2. The warranty period for this project is to be fully settled. Both parties A and B sign the “Project Warranty”, and the warranty period starts from the date of acceptance of the completed seal.

3. Both parties shall issue receipts for their money.

4. Project settlement method: waterway ____ meters, circuit ____ meters

5. Party B contracted content:

5.1, hydroelectric slotting, wiring, threading, buried tank;

5.2. All wastes from the hydropower construction process are packed and bagged at the site;

5.3. Construction of hydropower through the wall, drilling and cutting;

5.4, ​​switch socket panel installation;

5.5, the installation of hardware;

5.6 Post-installation of luminaires (other than crystal lamps);

5.7. Other charges will be calculated separately.

Article 6: Dispute Resolution

When there is a dispute between the two parties regarding the quality of the project, the parties shall negotiate and resolve the matter. If the parties are unwilling to negotiate or mediate the solution, or if consultation or mediation fails, they may file a lawsuit in the People's Court in accordance with this contract.

Article 7: Change and Dissolution of the Same

1. After the contract has been signed by both parties, both parties must strictly abide by it. Any party needs to change the contents of the contract, and after the agreement is reached, the supplementary agreement shall be signed again. Before the signing of the contract, if one party wants to terminate the entire contract, it shall submit it in written form and pay the breach penalty in accordance with ____% of the total contract price, and go through the termination of the contract procedure.

2. During the construction process, either party shall assume the termination contract and shall submit it to the other owner in written form. After the two parties agree to complete the liquidation formalities, the termination contract agreement shall be entered into and the contract shall be rescinded.

Article 8: Other Conventions

1. Delays due to force majeure or unforeseen factors, such as weather or power outages, may be postponed upon confirmation by both parties.

2. Party A may request Party B to meet the cross construction of other types of work on site three times prior to arrival. Party B shall pay Party B’s labor service fee of RMB 30/time for more than three times.

3. The quality problems caused by Party B's construction during the warranty period shall be repaired free of charge by Party B. They must arrive at the site within 48 hours after receiving Party A's notice. Due to Party A's improper use or force majeure, the quality of the main product purchased by Party A If the objection or the cause caused by the cause cannot be met, Party A shall pay Party B's maintenance cost according to the actual incurred expenses.

Article 9: Supplementary Provisions

1. This contract shall become effective after the signatures (stamps) of both parties A and B. The contract shall be terminated upon completion.

2. The project shall not be subcontracted after signing this contract.

3. This contract is in two copies. Both parties A and B hold one copy.

4. The contract is valid until _______.

5. The warranty period of the project is Wuian. After the warranty period expires, Party B shall maintain Party A's expenses.

Party A ________ Signature (stamp) Party B ________ Signature (stamp)

__________________________________________

The above is a model contract for water and electricity, and I hope to help you. For more information on hydropower contract, please continue to pay attention to this site information.

Hydropower Design Nanning Hydropower Renovation Design Change Hydropower & Hydropower Material Brand Hydropower Stage

Corn protein powder is the by-product of starch factory after produced corn starch. Its raw material is corn, by peeling, crashing, deslagging, and extracting starch and then concentrate, dried the yellow water to get protein products. It contains a lot of lutein that has golden color. It is good at encourage and disease-resistant for livestock and poultry. It also can deepen the egg`s color, make chicken`s skin and legs become yellow, and contain rich amino acids. It is a good additive for animal husbandry and feed industry.

Corn By-product

Corn Gluten,Corn Maize Gluten,Maize Gluten Feed,Corn Gluten Feed Corn Bran

MIDI FEED BIOTECH LIMITED , https://www.chinabromine.com