Anti-static floor is also called dissipative static floor. It is a kind of floor. When it is grounded or connected to any lower potential point, the charge can be dissipated. Therefore, it is very popular among owners, but this anti-static floor Different from the ordinary floor, therefore, there are differences in daily maintenance and cleaning. Today, Xiao Bian gave you a brief introduction to the way to clean the anti-static floor! First, clean with neutral detergent Anti-static floor should always keep the surface clean during use. When we find dust or dirt, use a vacuum cleaner or a wet mop (not dripping) to clean the floor. If there is dirt, use a neutral detergent to wet the surface and clean it. Avoid spikes, rough weights scratching on the floor surface, dragging, avoid shoes with nails to walk on the floor, keep the floor surface smooth and clean. Second, avoid contact with the black rubber chair Avoid placing a chair with a black rubber cushion on the floor to prevent black sulphides from contaminating the floor. Equipment with rubber pads and rubber wheels should not be placed on static-free PVC surfaces for long periods of time. Third, anti-static floor wax coating If there is dirt on the surface of the floor, it can be wiped off with a decontaminating powder (Wujie powder) and then waxed on the surface. The method of applying anti-static floor wax to the curing surface should be adopted. Non-anti-static floor wax should not be used. Fourth, avoid contact with hot and cold objects During use, strong tools are strictly prohibited from rolling and scratching the ground; high-temperature objects (electric irons, electric furnaces, etc.) and low-temperature objects (dry ice, liquid nitrogen, etc.) are prohibited from directly contacting the ground: oils and corrosive chemical contamination should be avoided. Loss of ground. It is forbidden to scrub the floor surface with a corrosive solvent such as strong alkali. Fifth, waxing frequency Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia). Home knowledge 1.Good temperature adjustment. It can provide a good planting environment, and be suitable for most kinds of crops. There structure is suitable in structure design, high in strength, nice appearance. Steel Structure Greenhouse,Steel Structure Prefabricated Greenhouse,Greenhouse Prefab Steel Structure,Long Span Greenhouse Steel Galvanized Zhongda Steel Structure , https://www.zhongdametal.com
2.The PV mounting structure will use Aluminum AL6005-T5, which is light, highly strength and long life. The whole structure`s will be designed under the policy of easy installation and easy operation.
3.To make sure the life of greenhouse can be in harmony, the greenhouse mainly structure will use the Hot galvanized steel to make sure the service lift can be around 25 years.
4.The structure can be used in the areas with high latitude and long sunshine duration time. In the daytime, the PV system absorb and storage those over sunshine, and then it can be used as warming and fill-in light to make the energy to be used in recycle.