(1) The rice cooker should not be bumped to avoid deformation, especially the inner pot bottom and the hot plate surface can not be bumped, otherwise the uneven contact will be bad, which will affect the thermal efficiency of the rice cooker. (2) The food should be placed in the lid of the pot and then the power should be turned on; the food should be disconnected before removing the food to ensure safety. (3) Do not take out the inner pot and turn on the power. There is no danger of overheating and burning the inner pot. (4) It is not advisable to cook acid or alkali foods, and do not use them in an environment with damp or corrosive gas to avoid damage to the parts and malfunction. (5) The inner pot shell and the electric heating plate should not be soaked in water. The electrical components are installed in the lower part of the pot body. They can only be wiped off with a dry cloth after the power is cut off. After the inner pot is washed, the moisture of the bottom of the pot must be dried with a cloth. (6) Do not use other utensils instead of the inner pot to heat on the hot plate. (7) Do not disassemble the electrical components of the rice cooker at will, so as not to affect the performance and use effect of the rice cooker. (8) Always check the power socket and power cord for damage to prevent accidents from leakage. Three bogey 1. Avoid connecting the power plug of the rice cooker to the distribution socket of the lamp or table lamp. Because the wires of the general desk lamp are thin, the current carrying capacity is small, and it is easy to age, or melted by heat. The power of the rice cooker is large and the current is large, which causes the lamp Wire to heat up, causing electric shock, fire and other accidents. 2. Avoid using rice cooker to cook too acidic or too salty food. Because the rice cooker liner is made of aluminum, using it to cook too acidic and too salty food will cause the inner liner to be eroded and easily damaged. In addition, cooking rice, When stewing meat, it should be guarded to prevent the porridge water from overflowing into the appliance and damaging the electrical components. 3. Taboo bumps. The rice cooker liner is easily deformed after being touched. After the liner is deformed, the bottom and the hot plate can not be well matched. When cooking, the heat is uneven, and it is easy to cook out the raw rice, so it should be taken lightly when used. Put it lightly.
T Post/Y Post can be installed with the panels without clamps and bolts, with easier installation and wider application.
T Post specification:
type: America standard with plate, Europe standard without plate
size: 0.95lb/ft, 1.25lb/ft, 1.33lb/ft
length: 5'-8'
surface treatment: hot dip galvanized or paint green normal
Y post specification:
standard size: 30*30*3mm, 35*35*3.5mm
weight: 1.32kg/m, 1.46kg/m, 1.83kg/m, 1.98kg/m, 2.05kg/m, 2.45kg/m
height: 1000mm, 1200mm, 1500mm, 1750mm, 2000mm, 2200mm, 2400mm
Surface treatment: galvanized and paint coated common color: black
*Related Products:t post,y post,star picket.
Galvanized T Post,Pp Y Plastic Post,Galvanized Y Post,T Post,Y Post Anping Deming Metal Net Co.,Ltd , http://www.fencedm.com