Heart Tip: 6 kinds of accessories tools for home decoration stone construction and installation, and two installation techniques. There are five kinds of construction techniques for home improvement stone. Below I have detailed descriptions based on the experience in the stone industry: Before we talk about the construction and installation process, let's first get to know the auxiliary materials: 1. Dry hanging glue (the industry is also called AB glue) It is a modified epoxy resin polymer with high bonding strength, fast curing, weather resistance and excellent aging resistance. It is widely used in the bonding of dry hanging stone curtain wall, and can also bond ceramics and cement. Metal, glass and other materials. It has permanent high bond strength, strong anti-aging ability and stable weather resistance; it has strong toughness and flexibility, which can prevent the plate from being deformed by vibration or deformation under wind and thermal expansion and contraction. Shedding phenomenon; its seismic, tensile, compressive and impact resistance properties are good, and the compressive and tensile strengths exceed the stone and concrete. Environmental protection can ensure beautiful appearance. Non-toxic and harmless, it will not pollute the stone after curing, and it can resist the erosion of chemical substances in natural pollution. After curing, it is waterproof, moisture-proof, stable in temperature environment, and will not become brittle and soft due to temperature changes. 2. Marble marble glue Marble glue is divided into two kinds of raw materials, epoxy resin and unsaturated resin. Some of the marble glue made of unsaturated resin can be cured in a humid environment, and the effect is also good. In addition, the excellent properties of marble adhesive are mainly reflected in hardness, toughness, rapid curing, polishing, weathering and corrosion resistance. 3. Structural adhesive Structural rubber refers to high strength (compressive strength >65MPa, steel-steel positive tensile bond strength >30MPa, shear strength >18MPa), can withstand large loads, and is resistant to aging, fatigue, corrosion and performance during life expectancy. Stable, suitable for adhesives with strong structural parts, can be used to bond wood and stone. The structural adhesive has high strength, anti-peeling, impact resistance and simple construction process. Used in metal, ceramic, plastic, rubber, wood equivalent materials or bonding between different materials. It can partially replace traditional connection forms such as welding, riveting, and bolting. The joint surface stress distribution is uniform, and there is no thermal influence and deformation on the part. 4. Screws for hanging on the bottom of the board The role of the screw is to nail the board to the stone and prevent the board from delaminating for a long time. 5. Dry pendants and expansion screws No. 1 is stainless steel expansion screw, No. 2 is corner code, No. 3 is pendant, No. 5 screw 6. Stone special clay Marble clay, when it is required to paste ceramic tiles or stone with deep back groove, in addition to the working base, glue should be applied to the back groove of the tile or stone to avoid empty drum. It is mainly used for the decoration of large cultural stone, artificial stone and stone with high water absorption rate on the inner and outer walls. It is a kind of modified tile adhesive developed for the larger cultural stone, artificial stone, stone with high water absorption rate and internal and external wall surface. Has a certain anti-sagging performance. It has high bond strength and certain flexibility, and can avoid the penetration of alkaline components in the adhesive into the stone, resulting in lesions on the surface of the stone. Has good water and aging resistance. Environmentally friendly, non-toxic and environmentally friendly. Has a certain waterproof and anti-disastrous function. The following describes the different installation processes of stone Dry hanging at the bottom of the board The dry hanging of the bottom of the wooden board is that the marble is attached to the wooden surface with the wooden board as the base layer. The wooden board needs to be screwed with the glue and the marble to achieve stability, durability and safety. The bottom of the board and the marble are 7mm. 2. Cement bottom expansion screw installation Dry the stone directly on the cemented substrate without scraping, and always hold the expansion screw together. When installing, the back of the marble needs to be dug a small hole and the expansion screw is stuck in, filling the dry hanging glue. Dry hanging glue needs to be stirred evenly to prevent secondary pollution of marble. The cement base and marble vacancies are suitable for 10mm. Luminous Sign,Escape Route Line,Self Glowing,Glowing Soft Vinyl JINAN REALGLOW CO.,LTD , https://www.realglowsign.com