As an amorphous resin, it has a good dimensional accuracy when forming and is not significantly changed by external deformation. Therefore, it performs well in dimensional accuracy and stability and is suitable for precision forming.
Industry application
1.Smart card industry
2.Digital printing industry
3.Optical film industry
4.The car industry
advertising Film,,Screen printing film,Advertising inkjet film,Water-based Reverse Print Backlit Film Guangzhou Quanxu Technology Co Ltd , https://www.skychema.com
Followed by the failure of the cylinder because there are leaks in the cylinder and cylinder outside, under normal circumstances are due to eccentric piston rod installation, lack of supply of lubricating oil, seal ring and seal ring wear or damage, cylinder impurities and piston The rod is damaged. We should adjust the position of the center of the piston rod in time, check the reliability of the mist filter regularly, and clean it in time.
There is a failure to the valve due to the first conductive magnetic valve inlet and exhaust holes are particularly easy to be blocked, it will lead to lax sealing, the active spool will be stuck and cause circuit failure. In this case, we must clean it in time.
Through the above introduction, we have a certain understanding of the failures of the stable soil mixing station and the solutions. If you have better suggestions and comments, please contact us in time.
Stabilized soil mixing station operation failures
The first is the failure of the gas source. Such failures mainly occur in places such as air compressors, pressure reducing valves, pipelines, and compressed air processing components. Due to the low pressure, the pressure-regulating spring is usually broken and the diaphragm ruptures. We must replace it in time. As the pressure rises slowly, the filters are generally blocked and must be cleaned frequently.