Cement Accelerator,admixture accelerator,set accelerators,non chloride accelerator,set accelerating admixtures Shanghai Hongyun New Construction Materials Co., Ltd , https://www.hongyunpce.com
Offline fingerprint inspection function description
1) Set the Machine Number:
You can assign a machine number to the fingerprint scanner, ranging from 1 to 255. This helps in organizing and analyzing patrol records more effectively in the background system. Each device must have a unique identifier for accurate tracking.
2) Set Management Fingerprint:
When accessing the system setup interface, the system will prompt for a management fingerprint. If it hasn't been set yet, you can press the ENT key to configure it. Alternatively, pressing the F1 key allows you to skip this step temporarily. Only one management fingerprint is allowed per system.
3) Other Function Settings:
Additional settings include options such as enforcing strict inspection order, enabling multi-fingerprint verification, and other customizable parameters. These features enhance security and control over the patrol process.
4) Registered Patrol Points:
Patrol points must be downloaded to the device via the backend management software after being configured. You can also register temporary inspection points. To do so, first input a valid ID, then scan the location. The system supports batch registration for efficiency.
5) Registering Fingerprints:
Fingerprints of all personnel can be registered using a handheld device and later uploaded to a computer. The system then transfers the fingerprint data along with the names and numbers of the patrol staff assigned to different routes to the respective devices.
The process involves entering a valid personal ID first, followed by capturing a live fingerprint. The system supports continuous and batch registration for multiple users.
6) Data Communication:
During data communication, the patrol unit will wait for the upload. Connect the device to the computer using a data cable, and use the background management software to transfer the collected data. Press [F1] to exit the communication mode if needed.
7) Modify Date and Time:
You can manually adjust the local date and time on the patrol device. If the time is incorrect, you can update it directly here. Alternatively, disable this feature and manage it through the backend software. When connected for data upload, selecting "Also modify date/time" will synchronize the clock automatically.
8) System Initialization:
To prevent accidental initialization, the system initialization option is not visible in the settings menu. To perform this action, the operator must press the “C†key, enter a security password, and verify the management fingerprint before proceeding.