Many sanitary enterprises in Foshan have been shut down according to law due to safety production problems.

<

             Publisher: yibing

Since entering the winter, news of factory explosions and fires have emerged due to dry weather and other reasons. The Foshan government has successively introduced a series of measures to strengthen the supervision of the factory and strictly enforce the law.

On November 13th, 2017 and January 9th, 1818, a total of 12,158 hidden dangers of production safety accidents were found in Gaoming District of Foshan City, 9494 rectification risks were implemented, 2,706 rectification orders were issued, and 305 closed and banned rectifications were completed. As of January 10, 2018, the economic production penalty for fire safety in Shishan Town of Foshan totaled 2,217,100 yuan, including 170 dust-explosive enterprises, 107 orders for rectification, and 12 enterprises were temporarily suspended.

Among them, Foshan Jiedian Sanitary Ware Co., Ltd. and Foshan Gaoming Zhengdong Home Furnishing Co., Ltd. failed to implement the “three simultaneous” system for safety production according to the regulations. No dust cleaning system was established, dust on the job site was not cleaned up in time, and paint booth was painted. The ventilation device and the explosion-proof electrical equipment facilities were not set up according to the specifications. The law enforcement personnel sealed the electric box switch according to law, ordered the business premises to temporarily stop the production operation, and resumed the production operation after examination.

On December 26, the appearance of a sanitary ware factory in Foshan An Industrial Development Zone was “clean and tidy”. However, after careful inspection by the inspection team, it was found that there were illegal residents in the inner house, and there were serious fire safety risks! The inspection team shall issue a notice of rectification on the spot and make a power outage, order the enterprise to rectify within a time limit, eliminate potential safety hazards, and apply for resumption of production after the inspection team has passed the inspection.

Foshan Tongye Wood Co., Ltd. has a large amount of wood and wood chips in the workshop, but the company did not install sprinklers in the workshop as required. Moreover, the inspectors also found that the wires in the workshop were covered with wood chips, and once the wires were short-circuited, sparks may cause fire or explosion. In addition, the inspectors also found that the company had fire hazards such as illegal construction, occupation of fire separation, and the company was given a fine of 10,000 yuan.

Foshan Ou Shangshang Home Furnishing Factory was given a fine of 20,000 yuan for the reasons such as the blockage and evacuation passage of the plate in the factory and the fire hydrant of the plant.

Near the year-end bathroom company is about to take a holiday, at this time we can not relax the importance of factory safety, in which aspects of daily production should be excluded from safety hazards. Xiaobian has the following suggestions:

1. Does the factory have “three violations”?

2. Is the factory environment clean and tidy, and whether the materials are stacked in order

3. Is the management of dangerous goods regulated?

4. Whether safety equipment and safety warning signs are installed in key projects and key equipments

5. Whether the use of hot fire has been approved and effective protective measures have been taken

6. Whether safety precautions are taken for dangerous operations such as high-altitude suspension and limited space operations

7. Does the facility of the factory meet the safety requirements?

8. Does the factory set up safety exits and evacuation channels as required?

9. Whether ventilation and dust removal meet the requirements

10. Whether electrical equipment and installation meet industry standards and safety conditions

11. Does the special equipment have valid safety documents?

12. Does the major hazard source adopt effective monitoring measures?

13. Are the safety regulations and safety procedures in place in place?

Since entering the winter, news of factory explosions and fires have emerged due to dry weather and other reasons. The Foshan government has successively introduced a series of measures to strengthen the supervision of the factory and strictly enforce the law.

On November 13th, 2017 and January 9th, 1818, a total of 12,158 hidden dangers of production safety accidents were found in Gaoming District of Foshan City, 9494 rectification risks were implemented, 2,706 rectification orders were issued, and 305 closed and banned rectifications were completed. As of January 10, 2018, the economic production penalty for fire safety in Shishan Town of Foshan totaled 2,217,100 yuan, including 170 dust-explosive enterprises, 107 orders for rectification, and 12 enterprises were temporarily suspended.

Among them, Foshan Jiedian Sanitary Ware Co., Ltd. and Foshan Gaoming Zhengdong Home Furnishing Co., Ltd. failed to implement the “three simultaneous” system for safety production according to the regulations. No dust cleaning system was established, dust on the job site was not cleaned up in time, and paint booth was painted. The ventilation device and the explosion-proof electrical equipment facilities were not set up according to the specifications. The law enforcement personnel sealed the electric box switch according to law, ordered the business premises to temporarily stop the production operation, and resumed the production operation after examination.

On December 26, the appearance of a sanitary ware factory in Foshan An Industrial Development Zone was “clean and tidy”. However, after careful inspection by the inspection team, it was found that there were illegal residents in the inner house, and there were serious fire safety risks! The inspection team shall issue a notice of rectification on the spot and make a power outage, order the enterprise to rectify within a time limit, eliminate potential safety hazards, and apply for resumption of production after the inspection team has passed the inspection.

Foshan Tongye Wood Co., Ltd. has a large amount of wood and wood chips in the workshop, but the company did not install sprinklers in the workshop as required. Moreover, the inspectors also found that the wires in the workshop were covered with wood chips, and once the wires were short-circuited, sparks may cause fire or explosion. In addition, the inspectors also found that the company had fire hazards such as illegal construction, occupation of fire separation, and the company was given a fine of 10,000 yuan.

Foshan Ou Shangshang Home Furnishing Factory was given a fine of 20,000 yuan for the reasons such as the blockage and evacuation passage of the plate in the factory and the fire hydrant of the plant.

Near the year-end bathroom company is about to take a holiday, at this time we can not relax the importance of factory safety, in which aspects of daily production should be excluded from safety hazards. Xiaobian has the following suggestions:

1. Does the factory have “three violations”?

2. Is the factory environment clean and tidy, and whether the materials are stacked in order

3. Is the management of dangerous goods regulated?

4. Whether safety equipment and safety warning signs are installed in key projects and key equipments

5. Whether the use of hot fire has been approved and effective protective measures have been taken

6. Whether safety precautions are taken for dangerous operations such as high-altitude suspension and limited space operations

7. Does the facility of the factory meet the safety requirements?

8. Does the factory set up safety exits and evacuation channels as required?

9. Whether ventilation and dust removal meet the requirements

10. Whether electrical equipment and installation meet industry standards and safety conditions

11. Does the special equipment have valid safety documents?

12. Does the major hazard source adopt effective monitoring measures?

13. Are the safety regulations and safety procedures in place in place?

A flange can also be a plate or ring to form a rim at the end of a pipe when fastened to the pipe. A blind flange is a plate for covering or closing the end of a pipe. A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together.

Although the word flange generally refers to the actual raised rim or lip of a fitting, many flanged plumbing fittings are themselves known as 'flanges':

There are many different flange standards to be found worldwide. To allow easy functionality and interchangeability, these are designed to have standardised dimensions. Common world standards include ASA/ASME (USA), PN/DIN (European), BS10 (British/Australian), and JIS/KS (Japanese/Korean). In the USA, ANSI stopped publishing B16.5 in 1996, and the standard is ASME B16.5

Stainless Steel Flange

Stainless Steel Flange,Machining Stainless Steel Flange, Stainless Steel Pipe Fitting Flange,Galvanized Stainless Steel Flange

Yixing Steel Pole International Trading Co., Ltd , https://www.yx-steelpole.com