Aluminum alloy swing doors are a new generation of doors. Nowadays, people like simple and fashionable in all aspects. This is also true when choosing doors and windows. All of them have aluminum alloy swing doors, and the appearance of aluminum alloy swing doors is for us. The life provides great convenience. Do you know the installation steps of the aluminum alloy swing door ? Today, let Xiaobian come to everyone to "make up"! First, aluminum alloy swing door installation instructions 1. First remove the door leaf from the split frame of the door frame. 2. Fold off the aluminum strips under the door frame and turn the fixing pieces on both sides of the door frame to a position suitable for installation. 3. Push the door frame from the front of the door hole to determine the front and rear position of the door frame. 4. Pay special attention to the fact that the flatness and verticality of the door frame must be adjusted with a level gauge to adjust the opening distance of the door leaf between the door lock frame and the door hinge frame. 5. After confirming that there is no problem with the adjustment size, fix the door frame fixing piece to the wall. 6. Re-insert the door leaf into the door hinge and check whether the door opening is smooth and firm. Second, aluminum alloy swing door material product introduction A bathroom aluminum alloy swing door material product, Shenyu Door Industry brand's 1 mm thick aluminum alloy door, the price is about 400 yuan, its product model is SD-002. The frame of the door is made of environmentally-friendly aluminum alloy, which is not easy to be deformed by moisture. Even the inner curved design is very beautiful and elegant. The groove has a built-in sealing strip, which has good waterproofness and elasticity, and sound insulation and separation. The heat also has a very good effect. The double-sided tempered insulating glass used is not only good for lighting but also very stylish and beautiful in appearance. Third, the quality problem of aluminum alloy swing door attention 1. Installation of the swing door should pay attention to the quality of the assembly, the joint should be flat, and the frame fan should not be smashed or cornered. 2. The surface layer is polluted and bitten. During the construction, the finished product protection is not paid attention to and the cleaning is not carried out in time. 3, the surface scratches, should be strictly prevented with hard objects to clean the surface of the dirt. 4, glass cutting size is not well mastered, did not measure the size according to the real thing, after cutting does not meet the installation requirements, too large or too small. 5. The mortar and debris in the notch are not cleaned properly. The cleaning should be carried out carefully. The glass is not allowed to be inspected. 6, nylon tops, rubber strips are missing or the length is not in place, the sealing material should be selected according to the design requirements, and timely replenishment after loss. 7. The rubber bead is not properly selected, resulting in poor sealing effect. The sealing rubber strip is easy to be disengaged at the corner. The glue should be glued under the sealing strip to make it firmly combined with the glass and the frame fan. 8. The glass is not cleaned or cracked. After the glass is installed, clean it with a soft cloth or cotton thread in time to achieve transparency and brightness. The cracked glass is found to be replaced in time. After understanding the installation knowledge of the aluminum alloy swing door, there must be some selection skills for the quality of the aluminum alloy swing door. I hope that the unit content of this article will be helpful to everyone. Today's content is over here, I want to know more. More decorative information, please continue to pay attention to the decoration home network! Wrought Iron Balcony Railing,Wrought Iron Railings,Iron Railing,Metal Railing MINGYI METAL CRAFTS CO.,LIMITED , https://www.mingyi-ironware.com
