Daily maintenance method of spraying machine

<

As is known, the spraying machine is mainly composed of a feeding device, a spray gun, and an atomization generating source, and the atomization generating source varies depending on different types and spraying machines. The atomization source of the spraying machine is composed of an air compressor, a gas pipe, an air oil water separator and a gas storage tank. At the same time, the atomization generating source of the spraying machine is composed of a power source and a high pressure pump.

Users who have used sprayers know that sprayers consist of spray and dry parts. Work facilities include spray booths equipped with spray heads, leather conveyor belts, drying systems and cleaning mechanisms. Nowadays, the rotating multi-nozzle sealed spray chamber is used. The spray head is controlled by ultrasonic or computer control. The sprayed leather is sent to the drying zone by the conveyor belt, and is collected from the other end after drying.

Daily maintenance methods for sprayers:

1. Spray line spray booth maintenance. If the air supply system of the spray cabinet is blocked or there is too much dust, the air filter cotton should be replaced. After about three days, the oil filter system should be cleaned behind the spray cabinet. At the same time, it is necessary to clean the oil of the conveyor chain from time to time and add butter.

2. Maintenance of the oil supply system. When the spraying machine is used, the paint return valve should be opened to make the paint flow back to the ink tank. Take out the ink tank and pour the cleaning solvent into the mixing tank and start the oil pump. Open the return valve and spray the gun to the maximum to let the cleaning solvent in the tubing. Circulate and clean the spray gun and oil pump. Pumps and spray guns are extremely precise. Do not disassemble them when cleaning to avoid damage.

Therefore, in the process of use, in addition to a few clear knowledge about the sprayer, and also to understand his maintenance methods, it is more convenient for our use!

Global hardware network

Concerned about surprises

Label: spraying machine drying area daily maintenance maintenance method atomization

Previous: Optional installation hardware sloppy Next: Sprayer equipment paint spray gun how to choose

Roll Forming Machine

Roll forming machine

Mactec Machinery Co., Ltd. , http://www.hzrollformingmachines.com