When the season is changing, the wooden furniture in the home is prone to cracking due to thermal expansion and contraction. Especially in the winter, when the temperature and humidity changes significantly, the frequency of arching and other problems on the floor increases, so it is very important to perform a comprehensive maintenance on the floor. Next Xiaobian introduces winter floor maintenance. Winter floor maintenance 1, winter floor waxing Wood flooring is favored by consumers with its natural texture, high durability and comfortable foot feel. However, the floor of a geothermal heating user's home may experience gaps during a winter or summer time. In order to solve this problem, it is only necessary to apply a solid wax to the floor in winter to seal the moisture remaining inside the floor and prevent the floor from shrinking when the ground temperature rises in winter. 2, room humidity to maintain 50% The climate in winter is relatively dry. Minimizing window opening time and increasing indoor humidity properly will not only benefit people, but also help the maintenance of the floor. Many people may think that opening the window in winter allows the outside air to come in, causing the indoor temperature to drop, which can reduce the phenomenon of floor separation. In fact, the real cause of floor separation from the seams is humidity, not temperature. In addition, the higher the air temperature is, the more water is contained in the saturated state, that is, the indoor humidity in winter is higher than that in the outdoor. The exchange of cold outdoor air will only make the room dry. Having an air humidifier is the most direct and effective, and the humidity in the room is preferably controlled at 50%-60%, which is relatively humid to the human body and the floor. 3, sudden hot shock injury In the process of heating the floor, the sudden heat will cause damage to the floor. In the process of turning on and off the geothermal heat, the gradual increase and the sudden drop in temperature all affect the service life of the floor. Floor repair tips 1, increase the humidity avoid direct "water fill" Dry indoor in winter, it is easy to cause floor cracking, so increase the humidity of the floor surface can effectively alleviate the floor cracking, warping problems, but for the floor moist, avoid large-scale direct "water make up", and should actively adjust the indoor humidity. The indoor spring should maintain a certain temperature and humidity, in general, the temperature should be less than 28 °C, the humidity is maintained at between 50% to 70% is better, not less than 40%. This temperature and humidity can keep the wooden floor in a relatively stable state. Humidifier humidification can be used if the natural humidity is not reached. 2, the number of floor waxing should not be too much The climate is dry, especially if there is still heating in the room, which can easily lead to a drier indoor air. Therefore, in order to make the floor more moist, the average residents increase the number of times of floor waxing to extend the life of the floor. In fact, if the waxing frequency is too frequent, it will cause damage to the floor. Because frequent waxing will result in wax wax layer superimposed, and there will be a gray layer in the middle of the wax layer, affecting the waxing effect. Therefore, properly waxing the floor can play a role in preventing moisture, preventing damage, increasing surface luminosity and facilitating cleaning. Most families now have laminate flooring, and the laminate flooring itself is not suitable for waxing because the surface of the laminate flooring is wear-resistant paper and the composition is “aluminum oxide,†which makes the wax impervious to the interior of the floor. Can be attached to the floor surface. After waxing, people will leave footprints while walking, affecting the appearance of the floor and difficulty in cleaning and care. Laying laminate flooring can be wiped with a wrung rag and then maintained with a care solution. Difficult-to-clean areas are removed with special cleaning agents. 3, to prevent small particles scratch the floor Small sand stays on the surface of the floor for a long time. After walking back and forth, gravel wear marks appear on the floor surface. Therefore, it is particularly important to keep the ground clean. If dust or gravel is found, it should be cleaned and cleaned immediately. The gravel on the floor should not be treated with damp rags and mops, and the gravel that is wrapped in it can easily cause scratches on the surface of the floor paint film. Editor's summary: The winter floor maintenance is introduced here, and I hope to help everyone. If you want to know more about yourself, you can follow the information on this site. Floor Care Winter Floor Care
Nordberg HP (high performance) cone crushers are the best choice of mine production and type of aggregate, its unique crusher speed, eccentricity cavity and optimized combination of features.
Over the use of HP cone crusher:
Main material: high manganese steel, chrome-manganese (Mn13, Mn13Cr2, Mn18, Mn18Cr2), Carbide
Adapt materials: river gravel, granite, basalt, iron ore, limestone, quartz, diabase, iron ore, gold, copper, etc.
Nordberg Hp Mantle,Crusher Hp200 Mantle,Metsos Hp200 Parts Mantle,Nordberg Hp200 Mantle Ma An Shan Shi Bo Da Jing Shen Machinery Co.,ltd , https://www.bodamachinery.com
