Smart toilet how to install the advantages of smart toilet

<

With the improvement of living standards, people's quality requirements for life are also increasing, and more and more people are paying attention to smart toilets. Smart toilets have a variety of functions, such as heating, warm water washing, warm air drying, and sterilization. At present, smart toilets on the market are generally divided into two types. One is a smart toilet with cleaning, heating, sterilization, and the other is a smart toilet with automatic membrane replacement. Next, we will introduce how smart toilets are installed and the advantages of smart toilets.

How to install smart toilet

1, pre-installation check

Unpack the product and check the product instructions against the instructions for use and check that the accessories are complete. Find tools such as screwdrivers, adjustable wrenches (250mm), and pliers.

2. Dismantling old products

Loosen the screws that secure the toilet seat and remove the installed toilet seat. Be careful when removing to avoid damaging the toilet. After the demolition, the remaining stains should be cleaned in time.

3, do a good job

Press and hold the release button to remove the mounting plate. Find a good position and fasten the fixing plate to the bowl with screws. Then move the upper iron to choose the best position and tighten with a wrench.

4, install the toilet seat

Insert the smart toilet seat into the mounting plate and be careful not to get the wire caught between the toilet seat and the toilet. After installation, gently raise the toilet seat by hand to confirm that it is securely fastened.

5, replace the water valve

Close the inlet valve and empty the water tank to prevent outflow. Unscrew the inlet pipe and install the bypass valve on the inlet valve. After confirming the firmness, reinstall the water inlet pipe.

6, connecting hose

Install the diverter valve threaded connection toward the inlet hose and tighten with a wrench. Connect the inlet hose to the diverter valve, taking care not to scratch the hose.

7, hose ring

When the water inlet hose is too long, the inlet hose can be tied in a loop with an accessory tie. In order to avoid wrinkles affecting the size of the water flow, this ring must not be bent too small, with a minimum bending radius of about 5 cm.

8, check the trial run

After installation, open the water valve and check for leaks at the interface. Turn on the power and turn on the switch. Keep pressing and try running to see if everything is normal.

The advantages of smart toilet

1, washing more sanitary

After each use of the toilet, the water-washing function of the smart toilet seat can replace the toilet paper for cleaning, and it is easier to eliminate viruses, bacteria, fungi or parasites that cause infectious diseases. A smart toilet cover with multiple flushing modes not only effectively removes dirt but also acts as a massage. The front and rear movable nozzles can meet the different flushing needs of men and women. Warm and warm winds of the smart seat cover are used for cleaning and drying.

2, the warm seat is not cold

In the cold season, the cold touch of the toilet seat is chilling, and the seat of the smart toilet can be automatically heated to a suitable temperature for the human body. Many brands also introduced temperature-controlled seats, which have different temperature profiles and are adjusted to personal preferences or regional weather conditions. They no longer have to fear the icy feeling when using the toilet.

3, self-cleaning, deodorization, power saving

Most smart toilets use stainless steel nozzles. Most professional brands produce self-cleaning products. After each use, the sprinkler sprays waterfall water to remove contaminated dirt. At present, many smart toilet seats have a deodorizing function. The principle is to use the photocatalyst or activated carbon contained in the toilet lid to eliminate odors. In addition, the toilet lid automatically reduces the temperature of the seat ring and the water, which saves power consumption when it is not used for a long period of time.

Editor's summary: The advantages of smart toilet installation and smart toilet are introduced here, and we hope to help everyone. Want to learn more related knowledge can focus on this site information.

Toilet installation toilet how to install

Round Dot Rubber Sheet

Parameters: specific gravity: 1.4-1.7g/cm; breaking tenacity: 3-5Mpa;  elongation:200-300%; hardness: 70 ±5°

Performance: temperature range: -20℃-70℃. good elasticity. wear resistance, waterproof and anti skid, effective anti corrosion;

Usage: this kind of products can be widely used for  laying and decoration of tables, floor and paths in hotels, sports facilities, conference halls, airports, ports, ships,vehicles, etc.

Color: black, gray, brown, blue946232918_680


808076680290971861

Product name

Colour

Product standard

Usage and property

SBR Rubber Sheet

Black,red,blue,

grey,green

GB/T5574-2008

Hardness:low middle high

Pressure:1.6~6.0Mpa

The allowed temperature:min-35℃ max +60℃

Medium:air or water

Usage:Punching washer/gasket ring /seal of the door window.

Acid-resisting Rubber Sheet

Alkali-resisting

Rubber Sheet

Black,red,blue,

grey,green

GB/T5574-2008

Hardness:low middle high

Medium:acidity liquid alkallnity liquid

Function:acid-resisting alkali-resisting

The allowed temperature:min-35℃ max +60℃

Usage:making all kinds of gasket ring/washer bedding equipment or surface.

Oil-resisting Rubber Sheet

Black,red,blue,

grey,green

GB/T5574-2008

Hardness:high

Medium:engine oil,gasoline,lubriacting oil,transformer oil etc.

Function:oil-resisting

The allowed temperature:min-30℃ max +100℃

Usage:punching washer/gasket ring bedding surface of equipment.

Heat-resisting Rubber Sheet

Black,red,blue,

grey,green

GB/T5574-2008

Hardness:low middle high

Medium:steam,air,hot air

Function:heat-resisting,aging-resisting

The allowed temperature:min100℃ max 250℃

Usage:punching all kinds of gasket ring/washer/gasket/board

Insulation Rubber Sheet

Black,red,blue,

grey,green

GB/T5574-2008

Hardness:low middle high

Function:prevent electricity/static electriaty.

The allowed voltage:max 50,000kv

Usage:This products is suitable for use in electriaty,oil chemistry,metallurgy,communication etc(spreading surface of punching all kinds of gasket ring/washer/boards)

Round Dot Rubber Sheet

Round Dot Rubber Sheet,Round Dot Rubber Floor,Round Button Rubber Sheet,Rubber Sheet With Round Button

HEBEI HENGDA SEALING MATERIALS CO.,LTD. , https://www.hengdasealing.com