Half-Type Shower Set,Brass Half-Tape Shower Set,Brass Shower Set,Luxury Shower Set,half rail shower,twin shower system Kaiping Rainparty Sanitary Ware Technology Co.,Ltd. , https://www.rpshower.com
Talking about "the method of reducing the noise of imported bearings of TIMKEN"
**Talking About "Methods for Reducing Noise in TIMKEN Imported Bearings"**
Home > Bearing Knowledge > Talking About "Methods for Reducing Noise in TIMKEN Imported Bearings"
Source: China Bearing Network | Time: October 28, 2013
---
Reducing noise in TIMKEN imported bearings is a critical concern in many industrial applications where smooth and quiet operation is essential. There are several effective methods to achieve this goal, each with its own advantages and considerations.
One of the most common approaches is to add chemical additives to the lubricants used in TIMKEN bearings. These additives can significantly reduce noise levels. For example, a factory in Tianjin developed a low-noise grease containing specific noise-reducing compounds. This product reduced bearing noise by 3.9 to 9.2 dB compared to standard greases, making it ideal for use in small or miniature TIMKEN bearings.
Another method involves using vibration absorption or isolation equipment. This can effectively dampen the noise generated by the bearings or prevent it from spreading. However, this approach often comes with higher costs and may lead to larger mechanical structures, which could affect heat dissipation or increase the risk of rust. Therefore, careful planning and evaluation are necessary before implementation.
A practical example is the use of a plastic jacket filled with anti-rust lubricant around the outer casing of high-speed thrust TIMKEN bearings. A similar plastic sleeve can also be placed inside the inner hole or outer ring of the bearing to prevent collisions with adjacent components during rotation, thereby reducing noise.
In some cases, inserting a central sleeve between the bearing and the housing can help absorb vibrations transmitted from the system. Proper placement is crucial; otherwise, it may have the opposite effect and increase noise levels.
Sound-absorbing enclosures are another effective solution. These enclosures are typically made of fiberglass or polyurethane foam, with steel plates on both the inner and outer surfaces. Small holes (1.2–1.5 mm in diameter) are evenly distributed across the surface, covering about 25–30% of the total area. The thick steel plates help block noise transmission, while the fibrous material absorbs high-frequency sounds and the perforated structure reduces low-frequency noise.
Changing the speed of the host machine is another technique that can help reduce bearing noise. While the load has less impact on noise, speed plays a significant role. If conditions allow, reducing the speed while increasing torque can achieve the same operational performance with lower noise levels.
By applying these methods, industries can significantly improve the working environment and extend the service life of their machinery.
---
**Related Bearing Knowledge**
Bearings are not always chosen based on smoothness alone. Understanding the differences between ultrasonic sliding bearings and other types is important. Analysis of SKF imported bearings and their "active smoothing system" for wind power applications. Common quality defects in bearings after fatigue and wear, as well as heat treatment issues.
---
**Recommended for Friends**
Comments | Close Window
Previous: The difference between extra dynamic load and additional static load of SKF bearings
Next: The reason behind spiral defects in bearings during the grinding process
This article is linked to http://
Please indicate the bearing network http://