Huijie Steel pipe Manufacturing wide range of products specifically meeting the demands and specifications required in the fabrication of shell and tube heat exchangers and boiler pressure industry. Our Heat Exchanger Tubes are used for the cooling, heating or re-heating of fluids, gases, condensor in a wide range of industries, such as chemical processing, hydrocarbon processing, and oil refining, nuclear power generation and aerospace,the standard such as ASME A/SA 179/A178/A210/A213/A312/A335/A789 etc
Boiler Steel Tube,Steel Boiler Tube,Heat Exchanger Tubes,Heat Exchanger Steel Tubes Ningbo Huijie Steel Pipe Manufacturing Co.,Ltd , https://www.hjbearingtube.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Rolling bearing device Rolling bearing device
Whether the bearing device is good or bad; will affect the accuracy, life and function of the bearing. Therefore, please fully study the bearing device; that is, please follow the operating specifications including the following items for the bearing device. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1. Clear the bearings and related parts. The bearings that are now smooth with grease and the oil seal or dust cover on both sides; there is no need to clear the seal bearing device.
Second, to view the dimensions and finishing conditions of the associated parts. III. Device The bearing device should be based on the bearing layout; the size of the scale and the cooperative nature of the bearing components; the pressure should be added directly to the end face of the ferrule; Body transfer pressure; bearing devices usually use the following methods:
a. Pressing the inner ring of the cooperative bearing and the shaft to make a tight cooperation; when the outer ring and the bearing housing hole are loosely engaged; the bearing can be first pressed on the shaft by the press; then the shaft is loaded into the bearing housing hole together with the bearing; Installed on the end face of the inner ring of the bearing; pad a device casing made of soft metal material (copper or mild steel); the inner diameter of the casing of the device should be slightly larger than the diameter of the journal; the diameter of the outer diameter should be slightly smaller than the inner ring of the bearing庋乖诒 庋乖诒 3 苌. The outer ring of the bearing and the bearing housing hole tightly cooperate; when the inner ring and the shaft are loosely cooperative; the bearing can be pressed into the bearing housing hole first; Less than the diameter of the seat hole. If the bearing ring is tightly engaged with the shaft and the seat hole; the inner ring and the outer ring of the device should be pressed together into the shaft and the seat hole; the layout of the device bushing should be able to hold the inner ring of the bearing together and The end face of the outer ring.
b. Heating cooperation through heated bearings or housings; using thermal expansion to transform tight cooperation into a loosely cooperating device approach. It is a common and labor-saving device approach. This method is suitable for devices with large interference bearings; The bearing or the ferrule of the separate bearing is placed in the fuel tank and heated evenly at 80-100 ° C; then it is taken out from the oil and quickly loaded onto the shaft; in order to avoid the cooling, the end face of the inner ring and the shoulder are not tight; after the bearing is cooled, Then the axial fastening is carried out. When the outer ring of the bearing is tightly cooperated with the bearing seat made of light metal; the hot-packing method of the heated bearing seat is adopted; the cooperating surface can be prevented from being scratched. When the bearing is heated by the oil tank; at a certain interval from the bottom of the box There should be a grid; perhaps the bearing should be hung with a hook; the bearing should not be placed on the bottom of the box; to prevent sinking impurities from entering the bearing or uneven heating; there must be a thermometer in the tank; strictly control the oil temperature should not exceed 100 °C; to avoid attacks Tempering effect; the hardness of the ferrule is reduced.
c. The tapered bore bearing of the tapered bore bearing can be mounted directly on the tapered journal; or the tapered surface of the adapter sleeve and the withdrawal sleeve; the degree of tightness of the cooperation can be measured by the reduction of the radial clearance of the bearing; Therefore, the radial clearance of the bearing should be measured before the device; during the installation process, the clearance should be measured to reach the required clearance reduction; the lock nut device is usually used in the device; the heating device can also be used.
d. Thrust bearing device The complete cooperation of the thrust bearing with the shaft is usually a transitional cooperation; the cooperation between the race and the bearing housing hole is usually the cooperation of the gap; therefore, the bearing is easier to install; the shaft spring of the double-way thrust bearing should be fixed on the shaft. ; to avoid relative to the shaft transformation. Bearing device method; usually under the condition that the shaft rotation is mostly; thus the cooperation between the inner ring and the shaft is a win-win cooperation; the cooperation between the bearing outer ring and the bearing chamber is the cooperation of the gap.
Recommend to friends comments close window Bearing related knowledge Bearing type code high quality tapered roller bearing 32005X
The coal mill grinding roller bearing in the thermal power plant uses the interspersed roller bearing in the wide use of the reducer profession. The high skill of the bearing industry adds the drive bearing steel to advance.
This article links to http://
Please indicate China Bearing Network http://
Previous:The cooperation and adjustment of high-speed bearing equipment: The selection of bearing scale
Rolling bearing device
Source: Bearing network time: 2017-12-22