701 Biological Microscope,Microscope For Biology Students,Microscope For Soil Biology,Biology Lab Microscope Ningbo Beilun Kalinu Optoelectronic Technology Co.,Ltd , https://www.nbyxmicroscope.com
Before using the CNC cutting machine, carefully read the operating manual of the feeder and other relevant information in order to operate the feeder correctly and pay attention to the following points:
1. The operation and maintenance personnel of the feeder must be professionals or technically trained personnel who possess the expertise of the corresponding feeder, and must operate the feeder in accordance with the safety operation regulations and the safe operation regulations.
2. Non-professionals must not open the door of the electric cabinet. Before opening the electric cabinet door, make sure that the main power switch of the feeder is turned off. Only professional maintenance personnel are allowed to open the electric cabinet door for power overhaul;
3. Except for some parameters that can be used by the user and can be modified, other system parameters, spindle parameters, servo parameters, etc., can not be modified by the user, otherwise it will bring damage to the operator such as equipment, workpieces, and personal; import pump
4. After modifying the parameters, when performing sub-machining, the opener shall be tested with the opener lock, single block, etc. without loading the tool and the workpiece. After confirming that the opener is normal, the opener shall be used. ;
5. The feeder's PLC program is designed by the feeder manufacturer according to the needs of the feeder and does not require modification. Incorrect modification, operation of the opener may cause damage to the feeder and may even injure the operator;
6. It is recommended that the opener run continuously for up to 20 hours. If the continuous operation time is too long, it will affect the life of the electrical system and some mechanical devices, which will affect the accuracy of the opener;
7. All connectors, connectors, etc. of the feeder are not allowed to be charged and inserted. Otherwise, serious consequences will occur.
Panel furniture outlook and use and maintenance of CNC cutting machine
Attention to the use of Flyida CNC cutting machine: