List of safety related standards implemented since August 1

<

Part I: Fire related standards
1. Fire safety signs Part 1: Marking GB 13495.1-2015

2. Fire Safety Engineering Guide Part 1: Application of Performance in Design GB/T 31540.1-2015

3. Fire Safety Engineering Guide Part 2: Fire occurrence, development and generation of smoke GB/T 31540.2-2015

4. Fire safety engineering guide Part 3: Structural response and external spread of indoor fires GB/T 31540.3-2015

5. Fire safety engineering guide Part 4: Detection, start-up and fire-fighting GB/T 31540.4-2015

6. General rules for fire safety engineering GB/T 31592-2015

7. Fire safety engineering Part 1: Evaluation, verification and validation of calculation methods GB/T 31593.1-2015

8. Fire safety engineering part 2: Required data types and information GB/T 31593.2-2015

9. Fire safety engineering Part 3: Fire risk assessment guide GB/T 31593.3-2015

10. Fire safety engineering Part 4: Setting fire scenes and setting fires GB/T 31593.4-2015

11. Fire safety engineering Part 5: Calculation requirements for fire plume GB/T 31593.5-2015

12. Fire safety engineering Part 6: Calculation requirements for smoke floor GB/T 31593.6-2015

13. Fire safety engineering Part 7: Calculation requirements for ceiling jets GB/T 31593.7-2015

14. Fire safety engineering Part 8: Calculation requirements for open airflow GB/T 31593.8-2015

15. Fire safety engineering Part 9: Guidelines for evacuation of personnel GB/T 31593.9-2015

16. Fire Fighting Vocabulary Part 1: General Terminology GB/T 5907.1-2014

17. Fire Fighting Vocabulary Part 2: Fire Prevention GB/T 5907.2-2015

18. Fire Fighting Vocabulary Part 3: Fire Fighting and Rescue GB/T 5907.3-2015

19. Fire Fighting Vocabulary Part 4: Fire Investigation GB/T 5907.4-2015

20, fire vocabulary part 5: fire protection products GB/T 5907.5-2015

21. Fire protection specifications for garages, garages and parking lots GB 50067-2014

22. Fire protection design for water conservancy projects GB 50987-2014

23, "Code for Design of Urban Fire Stations" GB51054-2014

Part II: Building Construction Related Standards

1. Technical specification for pharmaceutical industrial waste treatment facilities GB 51042-2014

2. General Hospital Building Design Specification GB 51039-2014

3. Basic terminology standard for geotechnical engineering GB/T 50279-2014

4. Seismic design specification for building electromechanical engineering GB 50981-2014

5. Standard for wind tunnel test methods for construction projects JGJ/T 338-2014

6. Technical regulations for ceiling construction of public buildings JGJ 345-2014

7. Technical specification for drilling and pipe piles JGJ/T 344-2014

8. Technical specification for foam concrete application JGJ/T 341-2014

Part III: Relevant standards for industrial enterprises

1. Safety technical specification for dry gas cabinets of industrial enterprises GB 51066-2014

2. Industrial circulating water cooling design specification GB/T 50102-2014

3. Safety technical specifications for dry gas cabinets of industrial enterprises GB 51066-2014

4. Design specifications for wool textile factories GB 51052-2014

5. Specification for structural design of non-ferrous metal industrial plants GB 51055-2014

6. Process design specification for optical cable production plant GB 51067-2014

7. Technical specification for denitrification engineering of cement factory GB 51045-2014

8. Specification for steel rolling engineering design GB 50410-2014

Part IV: Labor Protection Related Standards

Foot protection shoes (boots) safety requirements and test methods GB/T 31009-2014

Foot safety shoes (boots) material safety selection specification GB/T 31008-2014

Part 5: Road Traffic Related Standards

1. Traffic safety control conditions of Wutian Expressway GB/T 31445-2015

2. Early warning grade of traffic conditions for foggy roads GB/T 31444-2015

3, snow and ice weather road traffic conditions warning grade GB/T 31443-2015

4. Technical requirements for anti-corrosion of steel components for highway traffic engineering GB/T 18226-2015

5, LED active light road traffic sign GB/T 31446-2015

Part VI: Power, Electrical, and Electronics Related Standards

1, 110 (66) kV ~ 220kV intelligent substation design specification GB/T 51072-2014

2. Design specification for 330kV~750kV intelligent substation GB/T 51071-2014

3. Construction and acceptance specifications for 110kV~750kV overhead transmission lines GB 50233-2014

4. Electrical installation installation engineering explosion and fire hazard environment electrical installation construction and acceptance specifications GB 50257-2014

5, electrical installation engineering crane electrical installation construction and acceptance specifications GB 50256-2014

6. Safety requirements for lithium ion batteries and battery packs for portable electronic products GB 31241-2014

7. Design specification for electrochemical energy storage power station GB 51048-2014

8. Design specifications for small hydropower stations GB 50071-2014

9. Design specifications for general plane and transportation of nuclear power plants GB/T 50294-2014

10. Code specification for power grid engineering identification system GB/T 51061-2014

11. Specification for construction and acceptance of series capacitor compensation device for electrical installation engineering GB 51049-2014

Part VII: Coal Mine Related Standards

1. Engineering design specification for coal mine hoisting system GB/T 51065-2014

2. Coal mine water control design code GB 51070-2014

3. Design specification for mechanical and electrical equipment repair facilities of coal industry open pit mine GB/T 51068-2014

4. Construction specifications for coal mine equipment installation engineering GB 51062-2014

Thick Livestock Stable Horse /Cow Rubber Mat

            It belongs to the agriculture rubber products and it is widely used in farm. Factory direct manufacturer.Surface protection, impact absorbing, non-porous/ absorbing, anti slip design.

Can cover large areas, reduces damage to trays, floor, etc. Avoids bacteria build-up, reduces chance of animal slipping.

 Features:

1).Environmental protection. Without any chemical additions or pungent smell which may have side effects on cows.

2).Unique low-density pound pattern design plays a very good role on massage and anti-slip.

3).Outstanding durability, soft, provides cows a comfortable environment.

4).Space-saving, easy to manage and clean.


0402


Company information:


RenqiuXingcheng Rubber Products Co., Ltd. is located in the side of the Baiyang lake, our company is professional manufacturer of rubber products. We are one of the leading rubber company in china,The company is a private enterprise which is engaged in scientific research, production, sales and service and has obtained ISO 9001 certification. Our main business is producing all kinds of rubber products, including anti-skid plates, Rubber Sheet Series, Rubber Mat Series and horse mat series ect., The products are shockproof, anti-wear, anti-high and low temperature, anti-aging, oil resistant and chemical resistant in character.At present, our products have been sold at home and abroad and mainly exported to Canada, Germany, Chile, etc. We welcome domestic and foreign merchants to negotiate and cooperate with us. We are willing to join hands with old and new friends in creating a better tomorrow.  




Cattle Stable Mat

Cattle Stable Mat,Cow Rubber Mat,Rubber Cattle Mats,Cattle Stable Rubber Mat

Renqiu Xingcheng Rubber Products Co., Ltd. , https://www.xingchengrubber.com