In the event of a traffic jam, do you want to grow wings and fly over the "long dragon" ahead? This idea can be achieved. The world's first flying car was born in 1949 and is priced at 800,000 pounds (about 1.264 million U.S. dollars). This two-seat "speed car" can be transformed in 10 minutes. The maximum speed of land on the road is nearly 100 kilometers. The maximum speed of flying in the air is 177 kilometers. First Speeder made more than 60 years "Speed" is the wisdom of American designer Morton Taylor. The body is 6.4 meters long, with a wingspan of 9.14 meters and a weight of 952.6 kilograms. It is equipped with a 5.2-liter 4-cylinder engine with a power of 150 hp. The maximum speed of the land is 96.6 kilometers per hour. The fastest air speed at 3658 meters is 177 kilometers per hour. It is filled with oil. The cruising range is 483 kilometers. Taylor has been working on the development of flying cars since 1946 and made prototypes in 1949. In November of that year, the fantastic car accelerated along the grass runway and ended up with the propeller in the rear of the rear of the car and could not leave the ground. In the following month, Taylor made several changes to the "Raider" and he successfully made an official test flight in Longview, Washington. The first speeder produced only 6 cars "Speed" can complete the transformation from car to aircraft within 10 minutes. Taylor once said: "From the deformation of the aircraft to the car, women in mink coats and high heels can also operate." He hopes that the "flying" wings can be folded back to facilitate dragging into cars. After the test flight was successful, Taylor got a multi-party investment and began to produce "speed cars." The first three vehicles were sold for 25,000 U.S. dollars. Taylor plans to invest in mass production. Later, because of fewer than 500 orders, it failed to achieve. This section produced only 6 vehicles. The 1954 line for sale was on sale. Later, Taylor was committed to developing other types of flying cars. The British "Daily Mail" on the 17th quoted the words of the American EAA Aviation Museum Curator Ron Teverman as saying: "Molton Taylor's 'Speed' is the FAA-certified first land-air dual-use aircraft. ." "What's special is that it is the first land-air dual-use aircraft that you can order from the factory," Tverman said. "The output is so low. Most of them are already in museums. The opportunity for individuals to buy a car is quite rare. ."
The tool for hole processing is the earliest tool used in cutting tools, and it is also the most widely used tool. The objects of hole processing are various holes on the machine or instrument, such as the inner hole of the gear, the shaft hole on the box, and the porridge. Taper holes, etc. According to different uses and technical requirements, the tools for hole processing are divided into: drills, boring cutters, reamers, etc.
ROYI CNC Tool is a professional manufacturer of carbide boring bar. welcome to call and learn more details.
Solid Carbide Boring Cutter,Solid Carbide Boring Bar,Solid Carbide Boring Tools,Solid Carbide Boring Bars ROYI CNC TOOL TAIXING CITY CO.,LTD , https://www.royitools.com
