Furniture maintenance can be said to be a daily work that every housewife must do. There are different ways to maintain the furniture of different materials. Here are a few maintenance methods for common furniture materials.

Wooden furniture maintenance

1. Wipe and refrain from corrosive substances: Do not use rags with hot water, alkaline water or disinfectant water, and do not touch corrosive substances such as alcohol and nail polish, which will damage the paint on the furniture surface.

2. Avoid high temperature and keep dry: Because the material of wooden furniture is natural wood, it has the characteristics of plants, so it should not be placed in the place where the sunlight can be directly placed, and do not always blow the air conditioner heating, if Close to the window, you need to pull the curtains when the sun is strong to avoid the fading of the paint film. At the same time, the wooden table should avoid direct contact with the overheated tableware to prevent the food and soup from overflowing and damaging the table.

3. Wipe and refrain from corrosive substances: Regular waxing and lighting is also very important. Generally, it can be carefully maintained once every quarter. First clean the surface of the furniture with a soft cloth, then evenly rub the surface with the special glazing wax for the furniture, and then polish it with a clean soft cloth. This will enhance the moisture and light resistance while maintaining the long-lasting brightness of the furniture. .

Leather art furniture maintenance

1. Avoid direct sunlight: Avoid direct sunlight in the vicinity of leather furniture, and do not directly contact high-temperature heat-resistant sources, otherwise it will lead to aging and deterioration of the cortex.

2. Regular cleaning: Regularly clean to keep the pores on the surface of the leather from being blocked by dust. Wipe it with a cotton cloth or silk and wipe it gently. After wiping, you can also use Bi Li beads or polishing wax. Spray again to keep it clean. If you accidentally contaminate the oil stains, use a cotton cloth, a towel, a moderate amount of neutral soapy water, and then dry with a dry cotton cloth. Do not scrub directly with water. After cleaning, the leather sofa can be sprayed with a special leather cleaner, and repeatedly rubbed with silk to prevent cortical aging.

Cloth furniture maintenance

1. Reduce friction at the contact area: Try to avoid many people sitting on the edge of the mattress often, do not step on the mattress to keep the mattress flat and extend the service life; turn the mattress over and over regularly, flip it upside down or end to end To make the mattress tend to be even, the general family should be replaced once every 3 months; the spring mattress should pay attention to place a cotton felt or bedding at the contact with the bed frame to reduce friction and prolong life.

2. Handling should be stable: If the bed is to be moved, it must be placed flat and stable. It is best to use a special foot pad at the four corners of the floor to keep the overall structure stable. Bend the mattress, do not use the rope to force the bundle, try to avoid collision to avoid the contusion of the mattress or damage the internal structure.

Others Series Products
1.High Quality Die Casting Production series products.
2.Cast aluminum die cast parts in many Aluminum Die Casting for Auto parts, Aluminium Die Casting for Communications, lamp part series, water pump part series, power tool series, radiator part series, anti-static flooring products and Other Series Products.
3.Die casting consulting for aluminum die casting part design and Die Casting Tooling.
4.High quality surface on your aluminum die casting products.
5.Close dimensional tolerances on products die casted in aluminum.
6.Production on aluminum die cast parts will begin in less than two weeks typically..
7.Competitively priced aluminum diecast parts.
8.Various sizes and types of aluminum diecasting capabilities for your needs.
9.A360, A380, A383 and A413, and all Aluminum Die Cast Alloy Parts comply with the EU RoHS standards.
10.Aluminum Sand Casting Parts to Aluminum Die Casting Part conversions.

11.Die Casting Machine Capacity from 50 tons to 3000 tons.

Other Series Products

Alloy Die Casting Series Products,Aluminium Die Casting,Die Casting Series Products

Ningbo Bowang Machinery Co.,Ltd , http://en.zjbwjx.com