Reliable Air Release Valve, Air Safety valves, Air Valve For Pipeline, Air Relief Valve, choose the high quality Air Release Valve For Pipelines. Strainer Valve,Y Strainer Valve,Pipeline Strainers,Gas Strainer Valve Zhejiang Philic Fluid Control Co.,LTD , https://www.philicflow.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>High-speed fine-angle touch ball bearing device High-speed fine-angle touch ball bearing device
High-speed fine-angle touch ball bearing; it is mainly used for high-speed rotating occasions with light load; high-precision bearing, high-speed, low-temperature low-rise oscillation and inevitable service life. It is often used as a support device for high-speed electric spindles. The key components of the high-speed electric spindle of the internal and external surface grinder. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Primary technical goals:
1. Bearing accuracy target: Beyond GB/307. 1-94 P4 accuracy 2. High-speed performance target: dmN value 1. 3~1. 8x 106 /min
3. Service life (even): >1500 h
The service life of high-speed fine-angle touch ball bearings has a lot to do with the device; the following matters should be emphasized1. The bearing device should be carried out in a dust-free and clean room; the bearing should be carefully selected; the spacer for the bearing should be ground; under the premise of maintaining the height of the inner and outer ring spacers; the parallelism of the spacer should be controlled below 1um.
2. The bearing device should be cleaned before cleaning; when the inner ring slope is facing upwards; the hand is sensitive; there is no blockage; after drying; put a specified amount of oil; if the oil mist is smooth, a small amount of oil mist oil should be placed.
3. The bearing device should use special things; the force is even; the hitting is prohibited.
4. Bearing storage should be hygienic and ventilated; no corrosive gas; relative humidity should not exceed 65%; long-term storage should be regularly rust-proof.
Recommend to friends comments close window Bearing related knowledge Several misunderstandings when purchasing bearings are tested. The layout and characteristics of the imported bearings clarify the repair problems of the rolling bearings. Analyze the layout and function characteristics of deep groove ball bearings.
How to thrust (positioning) bearing device
This article links to http://
Please indicate the bearing network http://
Previous:Characteristics of the rolling noise of NSK bearing Next edit: Cat of the mousetrap
High-speed fine-angle touch ball bearing device
Source: China Bearing Network Time: 2014-01-24