A salt lick is
a deposit of mineral salts used by animals to supplement their nutrition,
ensuring that they get enough minerals in their diets. A wide assortment of
animals, primarily herbivores, use salt licks
to get essential nutrients like calcium, magnesium, sodium, and zinc. When a saltlick appears, animals may travel to reach
it, so the salt lick becomes
a sort of rally point where lots of wildlife can be observed.
Farmers have historically provided salt licks for their cattle, horses, and
other herbivores to encourage healthy Growth and development. Typically a salt lick in the form of a block is used in
these circumstances, and the block may be mounted on a platform so that
domesticated animals do not consume dirt from the ground along with the
necessary salt. Salt blocks for farm animals can also be
treated with medications, which may be convenient when someone needs to
medicate shy animals, or a large group of animals.
Salt Lick Block,Animal Feed Salt,Livestock Salt Lick Blocks,Animal Licking Salt Block Weifang Xinchang Chemical Co.,Ltd , http://www.xinchangchem.com
Instructions:
According to the actual needs of the work site, determine the lighting installation location and method, and then the distance from the lamp to the power contact point to prepare the corresponding length of Φ8 ~ Φ14mm three-core cable, and the three-core cable into a good steel pipe.
Loosen the compression nut of the lamp cable entry port (when it is shipped from the factory, it will not be used after the steel pipe is used). Introduce the power cable into the internal connection, fix the connection, and then tighten the cable cable and tighten the lamp cover. , Tighten the set screws.
When replacing the lamp, unscrew the Phillips pan head screw that holds the lamp ring and turn the lamp ring counterclockwise to separate the lamp ring and the transparent part from the housing. Take off the lamp and replace it with a new lamp. Install the lights.
Warning: 1. When installing and maintaining the luminaire, the power must be cut off. 2, non-professionals are not free to install or disassemble lamps.
Precautions:
1. When installing and maintaining the lamp, the power must be cut off.
2. When used, there is a certain temperature rise on the surface of the lamp, which is a normal phenomenon; the temperature of the center of the transparent part is high, and do not touch it.
3. When replacing the lamp, use the same type of lamp; if you change the lamp type or power, you should replace the ballast, capacitor and trigger accordingly. 
BCP explosion-proof platform lamp is suitable for:
It is suitable for fixed lighting in flammable and explosive dangerous places such as petroleum, petrochemical and shipping.
Suitable for fixed lighting in workshops, installations, pipelines, passages, offshore oil platforms, oil depots and other places.
BCP explosion-proof platform lamp structural characteristics:
Excellent explosion-proof performance, safe and reliable work in flammable and explosive dangerous places.
High-intensity gas discharge lamps are used as light sources, which have high luminous efficacy, uniform illumination, and an average service life of more than 10,000 hours.
Has good electromagnetic compatibility, will not cause interference to the surrounding environment.
The light body is made of lightweight alloy material, which has strong corrosion resistance and good impact resistance. The transparent parts are made of tempered glass with high temperature resistance and impact resistance. Through careful design, the air temperature in the lamp body is reduced, and the service life of the light bulb is improved.
It is small in size and light in weight, and it can be installed in various ways such as ceiling type, boom type, and light pole type. The operation is simple and convenient.
BCP explosion-proof platform lamp use methods and precautions analysis
Explosion-proof platform lamps are suitable for fixed lighting in petrochemical installations, oil platforms, gas stations, oil pump rooms, transit stations and other flammable and explosive places; explosive gas environments in Zone 1 and Zone 2; flammable dust environments in Zone 21 and Zone 22.