The Barbecue Wire Mesh other name is BBQ Wire Mesh. Be made by Stainless Steel Wire and medium carbon Steel Wire welded or weave to done.
The surface treatment : chrome, nickel, galvanized or polishing .
It is including: round flat/concave Barbecue Wire Mesh, square flat / concave Barbecue Wire Mesh , hemming Barbecue Wire Mesh, welded/weave Barbecue Wire Mesh, stainless steel Barbecue Wire Mesh .
The Barbecue Wire Mesh be maindly used for restaurant , BBQ shop, cookout, camp, military, travel and other activities's barbecue, steam or smoked about pasta, meat or fish.
The advantages of Barbecue Wire Mesh :
High temperatures
non-deformation
anti-rust
non-toxic and tasteless
easy to use
Barbecue Wire Mesh Barbecue Wire Mesh,BBQ Wire Mesh,Folding BBQ Mesh,Welded BBQ Mesh ANPING COUNTY SHANGCHEN WIREMESH PRODUCTS CO.,LTD , https://www.scfiltermesh.com
(1) contains a large number of particles close to the separation point;
(2) The material has a high moisture content;
(3) Spherical particles or materials with multiple contact points to the mesh openings;
(4) Static electricity will occur;
(5) The material has a fibrous material;
(6) More flake particles;
(7) The woven screen wire is rough;
(8) Thicker mesh screens such as rubber screens have an unreasonable hole design and do not reach the top and bottom, causing the particles to become stuck.
Because the particles of the material to be sieved are mostly irregular, the reasons for the blockage are also varied. In order to effectively prevent screen clogging, measures should be taken to address the reasons for the above-mentioned clogging. When the particle size of the material is fine, the clay content is large, and the screening particle size is small, the moisture blocking of the screen plays a decisive role. When the moisture in the material is more than 5%, if the material is dried unconditionally, the screen surface and the mesh hole should be targeted. When moisture is greater than 8%, wet screening should be used.
Analysis of Causes of Plugging Holes in Shaker Screen
Vibrating screen mesh plugging causes Analysis Screening, according to the nature of the material, will produce various forms of mesh plugging. The main reasons for the clogging of the sieve holes are as follows: