Rotary joints are used in virtually unlimited fields and are most widely used in a variety of materials, viscosity, temperature, pressure and speed applications. The swivel is a unique and exclusive product because it must be able to withstand very high pressures while rotating at very high speeds. To do this, the sealing surface must be nearly perfectly matched, that is, the seal must be slightly overlapped, regardless of the pressure factor of the medium, so that the load or pressure applied to the sealing surface is kept to a minimum and can be smoothed. Stable rotation and friction are minimized to extend service life and ensure no leakage. The products manufactured are advanced in technology, reliable in quality and complete in specifications. They are always in the leading position in the domestic industry and won the trust of customers. Fixed Support,Steel Support,Solar Panel Support,Ground Solar Mounting Support Fuzhou Mei Li Cheng Imp&Exp Co., Ltd , http://www.mlc-solar.com
The main products of rotary joints are: rotary joints, metal hoses, pipe compensators (expansion joints), quick-change joints, hydraulic quick joints, stainless steel quick joints, pneumatic quick-change joints and other sealing products. Widely used in steel, special converter joints, rotary joints, hydraulic slip rings, blast furnace mud gun hydraulic joints, continuous casting rotary joints, heating furnace rotary joints, paper, packaging, chemicals, rubber, plastics, textile printing and dyeing, glass, starch, petroleum , medicine, washing, tobacco, drying, electricity, food and other industries.
The other end of the pipe on the stainless steel rotary joint away from the vibration source should be effectively fixed so that the rotary joint can absorb vibration. The bellows should be effectively protected during the welding work at the construction site to prevent the welding slag from splashing the bellows. Stainless steel swivel joints must be installed in a straight line and must not be bent or translated. After the installation is completed, the nut and the backup nut on the tie rod should be locked. The pull rod should not be removed and the nut should be removed. The medium to be passed shall not be corrosive to the material of the bellows. The length of the chloride ion in the medium shall be adjusted by the tie rod when the product is installed. The adjustment amount shall not exceed the specified value.
