1. Product introduction
Powdered Activated Carbon with high quality Anthracite as raw material, its appearance is black powder or micro particles. After high temperature steam activation, to form the developed internal pore structure; it has large surface area and strong adsorption ability.It has good adsorption ability for the waste incineration that produce dioxin pollution in waste incineration power generation. This product is widely used in the field of solid waste incineration. It also widely used in wine, beverage, medicine, sewage treatment, power plants, waste incineration, electroplating and other fields.
2. Application
Powdered activated carbon widely used in adsorption dioxins, benzene and other complex gas that produce in the waste incineration. It has not the second pollution, low operation cost, good treatment effect, which can achieve a good purification purpose. The city garbage incineration plant is suitable for purifying combustion gas; the crematorium tail to purify containing sulfide gas. It also applied to high-end air purification, water treatment, wastewater treatment, desulfurization and denitrification, and effectively remove impurities and contaminants in the gas, and liquid and gas separation and purification; also can be widely used for the adsorption recovery of various substances with low boiling point, deodorized oil and so on.
3. Transportation and Packing
Woven bag, lined with plastic film bags, each 20kg can also be packaged according to customers demand, the product should be placed in a cool and dry place in storage. When transportation, the product should prevent from mixing with hard material, prevent breakage, leakage or mixed with debris that affecting the quality. Far away water soaking, oil and fire.
Powdered Waste Incineration Activated Carbon Coal-Based Columnar Gas Activated Carbon,Coal-Based Column Solvent Activated Carbon,Coal-Based Column Carrier Activated Carbon,Coal-Based Column Psa Activated Carbon Ningxia YiFeng RuiDa Activated Carbon Co.,LTD , https://www.nxyfrdhxt.com
In order to implement the national medium and long-term talent development planning, promote the transformation and upgrading of the machinery manufacturing industry, and better support the continuous innovation and development of the super-hard materials and products industry, according to the requirements of the professional and technical personnel knowledge update project, the Ministry of Human Resources and Social Security approved the case. The National Advanced Training Course on Superhard Materials and Products, hosted by the Henan Mechanical Engineering Society, will be held in Henan in late October. The specific matters are hereby notified as follows:
First, the training content
1. China Machinery Industry Development Report;
2. Diamond single crystal, coarse particles, large single crystal synthesis, fine powder manufacturing technology;
3. Cubic boron nitride single crystal synthesis and micropowder manufacturing technology;
4. Superhard abrasive manufacturing technology and superhard abrasive grinding technology;
5. Superhard tool manufacturing technology and application;
6. Special equipment for superhard materials and products industry;
7. Business development and management of super-hard materials and products;
8. Visiting study and exchange of experience.
The instructor is an expert from the domestic superhard materials and products industry. He has long been engaged in the research and development of technology and equipment in China's superhard materials industry, and has rich practical experience and theoretical level.
Second, training time and place
Training time: October 21st - 25th, 2014, October 21st is the check-in time;
Venue: Sanheyuan Hotel, Rucheng County, Shangqiu City, Henan Province, China 0370-6022222
Intersection of Futian Avenue and Shanghai Road in Yucheng County.
Yucheng County Government Contact: Chen Hongwei Mobile
By car: From the Zhengzhou Liulin toll station on the Lianhuo Expressway (G30) to the east, then to the Shangzhou Expressway (S81), and then from the Shangzhou Expressway (S81) Yucheng North Toll Station to the Sanheyuan Hotel.
Yucheng County Route:
After exiting from the Yucheng North Toll Station, turn left to the south to enter S210 Provincial Highway, then drive to the intersection with Futian Avenue (S206), then turn left onto Futian Avenue (S206) and follow Future Avenue (S206) to the future. At the intersection of Avenue and Shanghai Road, on the north side of Futian Avenue (S206) is the Sanheyuan Hotel.
Third, the participants
Practitioners of the industry and related industries in the superhard materials and products industry.
Fourth, other matters
1. After completing the prescribed courses and passing the examination, the training personnel shall be awarded the “National Professional and Technical Talent Knowledge Update Engineering Training Certificate†by the Professional and Technical Personnel Management Department of the Ministry of Human Resources and Social Security, and the training hours shall be recorded as “Continuing Education for Professional and Technical Personnelâ€. certificate".
2. During the training period, the accommodation and accommodation of the participants shall be arranged in a unified manner (free of charge), and the transportation expenses shall be self-care.
V. Training costs
The training fee is 1,500 yuan/person, including lecture fees and room rental fees.
All relevant units will be invited to return to the Henan Mechanical Engineering Society e-mail box before September 26th. Since the senior seminar is limited to 70 people, we will arrange the quota according to the time sequence of reply receipts. After the full registration, we will no longer arrange receipts and receipts, and the relevant enterprises and personnel will send back the receipts as soon as possible.
Henan Mechanical Engineering Society Contact:
Guo Xinwei, Deputy Secretary General, 13803833758
Deputy Secretary Li Jian 13838188257
Office Phone
E-mail:
Address: Room 209, School Office, No. 2, Agricultural Road, Zhengzhou City
click to download: Annex I registration receipt
Annex II schedule
Annex III List of Instructors and Introduction
Henan Mechanical Engineering Society
September 11, 2014
Notice on Holding a National Advanced Training Course on Superhard Materials and Products
A summary of the relevant units: In order to implement the national plan for long-term talent development, promote industrial restructuring and upgrading machinery manufacturing, better support continued innovation and development of superhard materials and products industry, according to the requirements of professional and technical personnel to update their knowledge engineering, the The Ministry of Human Resources and Social Security approved the preparation...
All relevant units: