1, anti-static clothing In order to prevent the accumulation of electrostatic clothing, anti-static fabrics for sewing fabrics for the anti-static clothing. Wear requirements:

(1) The area class of dangerous places for gas explosion belongs to Zone 0 and Zone 1 and the minimum ignition energy of flammables is below 0.25MJ. Antistatic clothing should be worn.

(2) It is forbidden to wear off in flammable and explosive places.

(3) It is forbidden to attach or wear any metal objects on antistatic clothing.

(4) When wearing anti-static clothing, it must be worn with anti-static shoes.

2, anti-static rubber shoes can eliminate the accumulation of static electricity in the human body, but can also prevent the following 250V power shock protection shoes for anti-static shoes. Wear requirements:

(1) Wear anti-static rubber shoes in places where the human body is charged with static electricity that may cause burning or explosion, and where the electrical equipment can accidentally cause electric shock and fire to the human body.

(2) In order to ensure the elimination of the effect of static electricity on the human body, the resistance of the ground should not be greater than 1.0*108 ohms when anti-static shoes are worn.

(3) During the wearing of shoes, the bottom of anti-static shoes should not be covered with insulating impurities.

(4) During the wear of the shoes, thick socks and insulating insoles with strong insulation or wool cannot be worn at the same time.

3. The helmet is a safety helmet that protects the human head from external force and acts as a protective cap. It is composed of a cap shell, a cap liner, a chin strap, and a rear hoop. Wear requirements:

(1) In the workplace at high altitude, at the maintenance work site or at the crossover work site, the staff must wear a safety helmet to enter.

(2) Wearing a safety helmet in a dangerous place must be taped to prevent it from falling off.

(3) If the shell or cap liner is aged or damaged, the impact resistance and penetration resistance are reduced, and no further use is required. Replace the new cap.

4. Protective belts used by Perza to prevent falls from falling are used as safety belts. It consists of straps, ropes, and metal fittings.

(1) Workers at high altitudes must have a good safety belt to work.

(2) Seat belts should be high and low, and attention should be paid to prevent swing collisions. Longer ropes with 3M or more should be used for buffers.

(3) The buffer, speed difference device and self-locking hook can be used in series.

(4) The rope must not be used for knotting, nor should the hook be hung directly on the safety rope and should be hung on the connecting ring. (5) The various components on the seat belt must not be arbitrarily removed, and care must be taken when replacing the new rope.

This website solemnly declares: This article is a reprint of the online media, only represents the author's point of view, has nothing to do with the China Labor Insurance Network. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.