First, what is the inkjet polished tiles,
inkjet polished tiles advantages
Inkjet printed tile is the traditional
body of the main polished in the texture of the product to take infiltration of
infiltration ink seepage sag production process of the new type of polished
brick, similar to the traditional seepage brick concept, Inkjet Porcelain Tiles in the inkjet process After infiltrating seepage infiltration into the brick
ink, and then fired after the polishing process.
The advantages of Printed Porcelain Tiles have the following 8 points:
A, no radioactive elements
Safer and greener
Natural stone is a mineral, without high
temperature sintering, it contains a few trace radioactive elements, long-term
exposure will be harmful to human body; Digital Printed Tiles on the raw
material selection more sophisticated, demanding, and extended over the years
stable polishing brick production process, Produced products safer, more
environmentally friendly.
B, evenness is better
More regular specifications, smoothness
better
Inkjet Tiles inherits the
advantages of ordinary polished production process stability in the production
process, regular specifications, especially the surface of the seepage ink can
penetrate into the embryo body about 1mm, in the process of surface polishing
can be thrown around 0.3mm Powder layer, so the overall flatness glazed
polished products to better.
C, more wear-resistant
Hardness, more wear-resistant
Inkjet ceramic tiles continue the natural
properties of ordinary polished tiles, Mohs hardness of about 6, the product
more wear-resistant, suitable for more places.
D, color is more controllable
More uniform color, the overall effect is
more uniform
Due to diagenesis of natural stone, rock
depth different color larger, Printed Wall Tiles with a new ink carefully
deployed, the same batch of products with the same color, color is more
controllable.
E, bending strength
The product is harder and more resistant to
bending
Due to the natural formation of natural
stone, timber time, weathering, etc. are not the same, leading to the degree of
closeness, strength varies; jet polished tiles by thousands of tons of
hydraulic press, and then by 1200 ℃ high temperature
sintering, high strength; Low rate, bending, cracking, bending strength is
good.
E, more anti-fouling
To stain more easily
printed wall tiles is still in the
dense embryo body with superfine powder fabric layer, superficial bright
surface in the process of application, so that the overall anti-fouling
performance of the product better and better.
E, gloss is higher
Brighter products, more beautiful colors
Inkjet polished surface using a new type of
seepage ink, after more refined polishing, the gloss of the tile surface is
higher than ordinary polished tiles, according to a media to the relevant brand
to do measured, can reach 96 degrees.
F, texture more vivid colors
Texture is more delicate, more colorful
Using nano-chromonic ions, 8-channel
digital inkjet penetration and other innovative technology, will permeate
inkjet and polished the nature of the show, truly give it a shoulder-length
aesthetic stone soul.
Traditional polishing is the use of roller,
screen production process, the texture of the color and pattern is relatively
simple, which is its biggest competitive disadvantage. The use of inkjet
polishing technology, while maintaining its superior physical properties at the
same time, greatly enriched texture, color and more vivid, the texture of the
product color and the overall effect of even comparable to the full cast glaze
Digital Printed Tiles Digital Printed Tiles,Printed Porcelain Tiles,Printed Wall Tiles,Inkjet Porcelain Tiles UMS New Materials Industry Co.,LTD , http://www.ums-factory.com
Note on the installation of alcohol concentration alarm (1) The alarm probe is mainly a detection element that contacts the combustion gas sensor. The platinum wire coil is coated with alumina and a binder to form a spherical shape, and platinum, palladium and other rare metals are attached on the outer surface. Therefore, be careful when installing to avoid damaging the probe.
(2) The installation height of the alarm should generally be 160-170cm, so that maintenance personnel can carry out routine maintenance.
(3) The alarm is a safety instrument, sound and light display function, and it should be installed in the place where the staff can easily see and hear, so as to eliminate the hidden trouble in time.
(4) There must not be strong electromagnetic fields (such as high-power motors and transformers) that affect the operation of the instrument around the alarm.
(5) The density of the gas to be measured is different, and the installation position of the indoor probe should also be different. When the measured gas density is less than the air density, the probe should be installed 30cm away from the roof and downward; otherwise, the probe should be installed 30cm away from the ground and upward.
How to install alcohol alarm
First of all, we must understand the proportion of air in alcohol, the proportion of air is greater than air, and the installation height should be as low as possible.