Wrinkle finish powder coatings with highly decorative ripplepattern finishes available in any of powder chemistry types e.g. epoxy, polyester , epoxy polyester and polyurethane . In certain applications this finish is chosen due to its ability to hide substrate defects.

Introduction: 

The raw materials of Powder coating are resins, pigments, fillers, harderner ect. Compared with lyquid paint, powder coating is environmental friendly and can reduce costs. Powder coating can form a harder finish than conventional paint and can be applied more efficient.  While it also has disadvantages, it is not good for large amd heat-sensitive objects. Usually the thickness of film by powder coating is >30 μm.

Technic Data:

• Specific gravity: 1.25-1.75 ( depend on colors)
• Particle size distribution(Laser Particle size analyser): Less than 5% above 100μm;50-65% above 32 μm
• Average particle size:35-45 μm
• Curing Schedule: 200°C 10minutes
• Optimal film thickness: 60-80μm
• 8-12 square meters/kg, thickness 60μm(100% of utilization rate)

The data above is rough and for reference only, please contact me for more accurate data when you have clear demands.

 

Purchase Note:

 

1.M.O.Q :

The minimum order is 500kg ,each color ≥ 100kg

2.Colors:

RAL color :we usually use RAL colors that is widely used in paint industry and easily find in market

Custom color : Color matching is available , if you have colors model ,please send to us for matching .

3.Prices:

Prices depend on the colors and using environment ,for prices please tell us the colors and using environment (indoor use or outdoor use).

4.Time of delivery :

Production will take about 5-8 days after receipt of prepayment,this is subject to the quantity .

5.Payment :

30% T/T prepayment , 70% T/T before shipment (or against BL)  or LC at sight .

6.Samples:

1kg powder sample is available for each color for your testing.
Sample is free of cost,but  if you pay for the air freight we will highly appreciate.

Contact us:
NANJING POWDER NEW MATERIAL CO.,LTD
Mb:13851928678
Tel:0086-25-52111679 Fax:0086-25-52111679
www.powder-coating.com.cn
www.prd.en.alibaba.com






 

 

Wood Veneer SPC Flooring

Wood Veneer SPC floor is waterproof, moisture-proof, non-slip, easy to recycle, soft and quiet, etc. In recent years, it has been recognized by European and American markets, and the demand has been released quickly.

Wear resistant layer is the best supplier in China. Home use 0.3mm wear-resistant layer on the surface of a number of processing treatment, can be used for 10 years. Selecting 0.7mm wear-resistant layer can improve the service life (according to the dense flow of people in the environment, the average increase of floor service life is 2-3 years).

Spc Wood Flooring,Spc Veneer Flooring,Veneer Spc Flooring,Wood Veneer Spc Flooring

Dalian Jiamei New Material Co., Ltd. , https://www.maijinfloor.com