Steel Building,Prefabricated Building,Steel Construction Steel Structure,Sandwich Panel Co., Ltd. , http://www.nsprefabhouse.com
MPC08 economical four-axis motion controller is widely used in PCB numerical control drilling machine for its excellent performance.
First of all, the movement mode of PCB numerical control drilling machine is mainly point movement, and its key technical indicators are high speed and high precision. MPC08 mainly completes the point motion control, which can quickly and accurately locate and drill down in an instant, and then move up to the next positioning hole while lifting the PCB board surface, which greatly improves the working efficiency of the PCB numerical control drilling machine. . The MPC08's maximum output frequency is 4MHZ, meeting the high speed requirements required for PCB drilling machines.
Secondly, the PCB drilling machine requires a large number of IO channels to monitor various device states and control output signals. Each MPC08 motion control card can control 16 general-purpose inputs and 16 general-purpose outputs, and has 17 dedicated input channels. Can be used as a universal input channel to fully meet the I/O channel requirements of the PCB drill press.
In addition, MPC08 also provides users with a secondary development interface to meet the needs of user special function development.
Application of motion controller in PCB numerical control drilling machine
PCB numerical control drilling and milling machine is a typical point motion control system, which is the key equipment for precision through hole processing of printed circuit boards. With the development of electronic products in the direction of miniaturization and miniaturization, printed circuit boards have higher and higher requirements on the aperture, line width and line spacing of the via holes. Correspondingly, the PCB numerical control system is developing in the open direction of high speed, high precision, high reliability, system integration, flexibility and high intelligence.