According to experts from the decoration and decoration industry association, compared with new house renovations, the second-hand renovation of old houses involves more problems than new houses and changes are relatively large, but as long as comprehensive and reasonable considerations are given in design, they can be successfully implemented. Look for a new look. A major renovation project is the demolition of old windows and doors, original walls, outdated ceilings, floor tiles, paint, waterproofing, plastering, etc., as well as some non-bearing walls that can change the pattern of houses. It is necessary to remind the owners that when demolishing the wall, when it is demolished, it must be avoided. Many old houses are mostly brick-concrete structures. Any hole or door opening on the load-bearing wall at random will change the structure of the structure of the house, which will bring extremely serious hidden dangers. Therefore, before the renovation, the owner is best to consult, apply for and record with the property management department. In addition, it is recommended that the owners change their aging water pipes into PVC pipes and plastic-lined steel pipes that are commonly used nowadays. In addition, the aging of old wires and illegal cabling may also be replaced or renewed through secondary renovations. Second-hand housing decoration considerations Xuanguan renovation house decoration new house house home paint decoration home The utility model discloses a Kitchen Shower head that is convenient to switch the water outlet mode, has a compact structure, and is easy to use and a kitchen faucet using the kitchen shower head. The shower head includes a shower body and a shower head provided with a spray water outlet and a V-shaped water outlet. , The shower head is provided with a water separator, and the water separator is provided with an annular flow channel and an inner flow channel respectively connected to the spray water outlet body and the V-shaped water outlet body, and the lower end of the outer wall of the water separator is upwardly circular A plurality of water inlet holes connected to the annular flow channel are provided, and a first sealing ring is provided on the lower side of the water inlet hole; the water outlet end of the shower body is connected with a converter, and the converter is provided with a communicating In the water diversion cavity at the water outlet end of the shower body, the lower end of the water diversion device is installed in the water diversion cavity and can move up and down, and the upper end of the inner wall of the water diversion cavity is provided with a matching first sealing ring Kitchen Pull Shower,Kitchen Pull Shower Head,Stainless Steel Shower Head,Rotating Wash Basin Shower Yuyao Zelin Sanitary Ware Co., Ltd , https://www.zelinfaucet.com
Li Kemai Lighting   Jumei Indian Home Furnishing Museum