In practical applications, the starter is often named after the name of the discharge lamp. Fluorescent light starter, also known as starter. Commonly used fluorescent lamp starters and fluorescent circuit fluorescent lamp starters and fluorescent lamp circuits. The fluorescent starter is a switch control element that can also be replaced by an ordinary switch. Another type of fluorescent lamp working circuit does not use a fluorescent lamp circuit of a separate starter], and each part of the circuit is indispensable during the startup of the fluorescent lamp. High-pressure mercury lamp starter, structure and circuit of high-pressure mercury lamp are shown in Figure 3 [High-pressure mercury lamp structure and circuit]. The starter consists of an auxiliary electrode and a current limiting resistor in the discharge lamp structure. High-pressure sodium lamp starter, circuit and starter of high-pressure sodium lamp are shown in Figure 4 [circuit and starter of high-pressure sodium lamp]. The starter generates a pulse voltage with a peak value of several thousand volts and a width of several microseconds under the action of the power supply voltage, and is applied to both ends of the lamp tube, and then the lamp is started to light up under the joint action of the power supply voltage. When the lamp is illuminated, the starter stops working due to the lower lamp voltage. Short arc xenon lamp starter, short arc xenon lamp circuit and starter are shown in Figure 5 [short arc xenon lamp circuit and starter]. The starter inputs a DC voltage, which is converted into an AC voltage of a certain frequency by a vibrator and a transformer, and the value is several thousand volts, and then a high-frequency voltage of intermittent oscillation is formed by a spark oscillator, and finally a high-frequency voltage of tens of thousands of volts is output through a high-frequency step-up transformer. It is applied to both ends of the xenon lamp, and then the lamp is turned on when the power supply voltage is combined. Metal halide lamp starter metal halide lamp circuit and starter metal halide lamp circuit and starter]. Under the action of the power supply voltage (AC), the starter outputs a high-frequency voltage of several thousand volts through the vibrator spark oscillator and the high-frequency transformer, and is applied to both ends of the lamp tube, and the lamp is started to light up under the action of the power supply voltage. Different gas discharge sources can use the same type of actuator, and the same gas discharge source can also use different types of actuators. Check Valve,Hard Sealing Valve,Fluorine Lined Check Valve,Hard Seal Check Valve Zhejiang Meide Machinery Co.,Ltd , https://www.meidemachinery.com