What is the method of Xin Si Yuan Rong test room speed and bandwidth?

<


What are the methods of test room speed and bandwidth


A good speed room, the first packet loss rate can not exceed
1%, preferably
There is no packet loss for 1000 pings. This is ideal, but this is not an absolute value, as long as it is lower than
1% of all belong to a good routing situation. Secondly
The ping value should be small, and the mean value of telecommunication adsl ping in the city must not exceed
20, generally
10, Inter-provincial adsl ping average should be
20-40 is normal. The third point is
The ping value should be uniform, this we can refer to the results of the mobile ping value, although the smallest
The ping value is only
4, but from time to time there are dozens, the largest 79, this is the performance of routing instability.


The second method of testing, test routing
Tracert router



The engine room test factory prompts this to see how many routers the test point needs to pass through to reach the target server, and it can be seen by the number of milliseconds of each route that passes through the router and passes through that router.
Ip nslookup to view this
Ip belongs to the operator, even the operator of that province and city, so it is clear at a glance.


The third method is also used by ordinary people to download files.


The room test factory prompts this is very simple, first understand the maximum value of your Internet access method, if it is
2MBPS ADSL, then the theoretical maximum download speed is
2*1024/8=256KB, the actual maximum download speed is
More than 200KB is stable, if it is 512KPS
Adsl, generally
50-60KB reached its peak.

There are two main  Bonded NdFeB Magnet manufacturing methods:

ï‚·Bonded Injection Plastic Moulding NdFeB
ï‚·Bonded Compression Moulding Ndfeb

Bonded Compression Moulding NeFeB Magnets ( called Compression Bonded Magnets) are made by using many isotropic Neodymium, Iron, Boron materials, as well as crushed and powdered Samarium and Cobalt ingredients.Combinations of different elemetal grades are used to creat specific magnetic properties. Compression Bonded Magnets offer higher magnetic strength than Injection Plastic moulded magnets. Although Compression Bonded Magnets have higher magnetic particle density, ther are limeted to simple geometric shapes due to the compaction process. The epoxy is used to protect the magnet surface from industrial solvent and automotive fluids. The normal applications of the magnets range from -40℃ to 150℃.

The advantages of Compression Bonded Magnets:
1. High quantity and even volume manufaturing, with up to millions of pieces per year
2. Single-time moulding and multi-poles orientation.
3. Effective surface treatment to prevent corrosion. The product is coated with epoxy resin to be protect the surface smoothing.
4. Excellent magnetic properties. The energy of Compression Bonded Magnets is 3 times as high as anisotropic ferrite magnets.

Application of  Compression Bonded magnets:
•Mini motors
•Automatic contolling devices
•Sensors
•Drivers
•Telecom


Bonded Compression Moulding NdFeB

Bonded Compression Moulding Ndfeb,Ndfeb Arc Bonded Magnet,Ndfeb Block Bonded Magnet

Jinyu Magnet (Ningbo) Co., Ltd. , https://www.magnetbonwin.com