Single
layer roof Roll Forming Machine
Single Layer Roof Roll Forming Machine is
composed of feeding, molding and shaping up after cutting machines, color plate
and its appearance tidy and beautiful, uniform lacquer veins, high strength,
durable, widely used in industrial and civil buildings, such as factories,
warehouses, stadiums, exhibition halls, theaters room and wall surface.
Components
of single layer roof roll forming machine:
Manual Uncoiler , Guiding Platform, Main Machine Of
Roll Forming,Cutting Device, Hydraulic Station, PLC Control, Supporter Table.
The processing technique
and deployment of single layer roof roll forming machine:
Man-made uncoiler-Roll forming machine-PLC system-Hydraulic system-Post cut
Description
of single layer roof roll forming machine:
Thickness
of material: 0.2-0.8mm
Main
structure:300H
steel
Wall
plate: 14mm
Diameter
of shaft: Ф70 solid
Chain:
P=19.05
Bear:
6210
Electric
motor power: 3KW
Reducer:
4# cycloid reducer
Roller:
11rows
Forming
speed: 8-12m/min
Material
of Rollers: Carbon Structural Steel Hard chromium Plating on the surface
Cutting
type: Hydraulic shearing
Motor:
380V, 50HZ/3 phase
Electrical
part:CHINT,Delixi
Hydraulic
motor: 3KW
Tail
cutting material: Delta PLC-14ES
Size
of machine: 5.8m*1.4m*1.2m
Delivery: 30
days after receipt of advance payment
Package:
Plastic packing and nude in the container
Payment
Term: T/T, L/C, Trade assurance
Warranty: 12 months limited warranty
FAQ:
1. Q:
Are you a manufacturer?
A:Yes,
we are manufacture with roll forming machine factory.
2. Q: What
details of the machine you should get from me.
A: I will
confirm all details with you, such as the voltage in your city.
3. Can you
use other brand of spare parts for me if i want?
A: No
problem if you want to pay the money.
Single Layer Roof Roll Forming Machine Single Layer Roof Roll Forming Machine,Single Layer Roofing Sheet Machine,Galvanized Roof Roll Forming Machine,Steel Single Layer Roof Roll Forming Machine Shijiazhuang Zhouming Steel Building Materials Co., Ltd. , http://www.zmsteels.com
Seven-hole transfer mold and double-edged precision boring tool
ZM40 plunger pump cylinder (Fig. 1) processed by our factory, the material is QAl9-4, the main technical requirements: (?) 19mm hole roundness tolerance 0.005mm in the depth of 52mm, surface roughness R_α0.2, seven holes (?) The perpendicularity of 19 mm to the end face B is 0.03 mm. Under the condition that the matching clearance between the plunger and the plunger hole is 0.02 to 0.03 mm, seven holes are required to be interchanged.