First, take a soft microfiber cloth and gently wipe the outside of the lamp to remove any dust or fingerprints. This step is important because any residue left on the glass may become visible when the light is turned on. It’s also recommended to wear gloves during this process to avoid leaving oily smudges.

Next, locate the small protrusion in the center of the lamp base. Make sure that this protrusion is facing the reflector part of the lamp. This alignment is crucial for proper installation and optimal performance.

Now, place one corner of the bulb into the socket. Pay close attention to the groove on the bulb and align it with the corresponding protrusion on the lamp base. Gently push the bulb outward with a little pressure until it clicks into place. Repeat the same process on the other side, ensuring both sides are securely seated within the protrusions. Once installed, turn on the lamp and double-check that the bulb is fully and correctly inserted. If not, it may affect the lamp's ability to start properly.

Finally, install the glass shield over the lamp. It’s important to secure it as tightly as possible. The glass shield serves two main purposes: it helps reduce heat radiation from the lamp and protects against water splashes, which could cause damage or even an explosion if the lamp is exposed to moisture.

Split Submersible UV Lamp

Uv Aire Bulb,Metal Halide Uv Lamp,Cheap Uv Lights,Sterile Air Uv Lights

Guangdong Kingrate Optoelectronic Technology Co., Ltd. , https://www.kingrateuv.com