High Heat Resistance Corrosion 309S 309 Stainless Steel Plate


Model NO.: 309S 309
Width: 1000mm to 2200mm
Length: Cut as Requirement
Surface: 2b, No.1, 1d, 2D, Hl, 8k, Ba, Sb
Edge: Mill Edge or Slit Edge
Mtc: En 10204/3.1
MOQ: 1 Ton
Transport Package: as Customer′s Requirement
Specification: Thickness 0.3mm to 280mm
Origin: China
HS Code: 72193400
1:Brief Introduction Of 309S/309 stainless steel:
Alloy 309/309S (UNS S30900/S30908) austenitic stainless steel is typically used for elevated temperature applications. Its high chromium and nickel content provides comparable corrosion resistance, superior resistance to oxidation, and the retention of a larger fraction of room temperature strength than the common austenitic Alloy 304.
Alloy 309 (UNS S30900) is an austenitic stainless steel developed for use in high temperature corrosion resistance applications. The alloy resists oxidation up to 1900°F (1038°C) under non-cyclic conditions. Frequent thermal cycling reduces oxidation resistance to approximately 1850°F (1010°C).
Because of its high chromium and low nickel content, Alloy 309 can be utilized in sulfur containing atmospheres up to 1832°F (1000°C). The alloy is not recommended for use in highly carburizing atmospheres since it exhibits only moderate resistance to carbon absorption. Alloy 309 can be utilized in slightly oxidizing, nitriding, cementing and thermal cycling applications, albeit, the maximum service temperature must be reduced.
When heated between 1202 - 1742°F (650 - 950°C) the alloy is subject to sigma phase precipitation. A solution annealing treatment at 2012 - 2102°F (1100 - 1150°C) will restore a degree of toughness.
309S (UNS S30908) is the low carbon version of the alloy. It is utilized for ease of fabrication. 309H (UNS S30909) is a high carbon modification developed for enhanced creep resistance. It most instances the grain size and carbon content of the plate can meet both the 309S and 309H requirements.
Alloy 309 can be easily welded and processed by standard shop fabrication practices.

Other Grades:
440B,440C,440F,610,630,631,632,635,660,Alloy 200,Monel 400 ,Alloy K-500 ,Inconel 600 , Incconel 601,
Inconel 625 , Inconel 718 , Alloy 800 ,Alloy 800H,Alloy 800HT,Inconel 825,Alloy 276, Alloy 20, Alloy 59

2:Chemical Composition with different standards:
Tianjin Zhongyantiancheng Steel Co.,Ltd
Commodity Stainless Steel Plate/Stainless Steel Sheet
Material 309S
06Cr23Ni13 SUS309S 309S 1.4833
Chemical Composition C Mn P S
≤0.08 ≤2.00 ≤0.045 <=0.03
Si Cr N Ni
≤0.03 22--24 No 12--15
Thickness 0.3mm--16mm(cold rolled) 3mm--280mm(hot rolled)
Width 1000mm--2200mm
Length 1000mm-6000mm, as customers' request
Surface BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D
manufacture Hot Rolled/Cold Rolled
Packing Packed in bundles with standard export sea-worthy package
Delivery Time Within 15 working days, according to customers' quantities
Quality High Quality.SGS inspection is accepted if needed
Place of Origin Tianjin
Productivity 500 MT/Month
Payment T/T,L/C
Application ncinerators, rotary kilns and calciners,grids, piping, wind boxes
Note We can also do other materials

3:Stainless Steel Plate Process:
High Heat Resistance Corrosion 309S 309 Stainless Steel Plate

4:Stainless Steel Plate Package:
High Heat Resistance Corrosion 309S 309 Stainless Steel Plate

5:About us:
Tianjin Zhongyantiancheng Steel Co.,Ltd(short for ZYTC ) is a professional manufacturer and exporter of steel products in China, located in Tianjin Beichen District, having the biggest port in North China.
With 20 years of development, the group has become the leader in steel, product variety, complete specifications and so on in North China market, large inventories more than 100,000 tons are maintained all the time.
ZYTC is specialized in steel products, especially Stainless steel pipe,Stainless steel bar,Stainless steel plate (TG,KSK,BG,Krupp), Round bar(SHOUGANG,DAYE), Spiral pipe(LIDA), Aluminum steel plate,Aluminum pipe ,Copper and so on . 
ZYTC has cooperated with Tianjin Seamless Steel Tube Plant(TPCO), Baotou Steel Pipe Plant, Chengdu Steel Pipe Plant, Anshan Steel Pipe Plant,Baoshan Steel Pipe Plant and other steel pipe plants.Round bar cooperated with Beijing shougang goup,Tonggang steel group, Daye steel bar group ,Benxi bengang group an so on , Baotai titanium group,Baoji Lixing group,Stainless steel plate cooperated with Shanxi TAIGANG Steel Plate grouop,Baogang group,Shanghai Kelubo group ,and Puxiang steel group. all these corporations mentioned above are our shareholder partners. 
ZYTC principle is: supplying the best products and service,being the best supplier.
The company can make steel product according to particular specifications and materials. ZYTC will perfect our quality management system and supply products of high quality to our customers.
We are all looking forward to establishing business relationships with customers all over the world!

6:Why choose us?
* More than 20 years experience in stainless and aluminum steel fields.
* Samples available.
* Specialist metallurgic advice and flexible service.
* High level of expertise, in-depth product knowledge.
* Competitive price, high quality,rich experiences and high reputation
* Delivered on time.
* Good after-sale service.
* Well recognized and trusted by customers.

7: Other productions:
High Heat Resistance Corrosion 309S 309 Stainless Steel Plate
High Heat Resistance Corrosion 309S 309 Stainless Steel Plate
High Heat Resistance Corrosion 309S 309 Stainless Steel Plate