Cold room doors are specially designed for cold rooms, cooler rooms or refrigeration warehouse. It can be sliding type or swinging type design. And sliding type door can be automatic or manual. Made from thick polyurethane foam sandwich panel, cold room doors are with excellent therma insulation performance.
Cold Room Doors,Cold Storage Door,Cool Room Doors,Cold Store Doors, Cold Room Sliding Door, Cold Room Swinging Door, Refrigeration Door SHANGHAI KENVO DOOR CO.,LTD , https://www.kenvodoor.com
Common Issues & Fixes for Internal Doors
While many people rarely need to make adjustments to their doors, even minor issues can significantly impact the appearance of an entire room. If your door isn’t looking quite right, take a moment to explore common problems and simple solutions provided by the experts at Leader Doors.
**Drooping Doors**
One of the most frequent complaints is difficulty closing a door due to misaligned locks. This typically happens when the hinges have loosened over time. Inspect the screws securing the hinges and tighten them using a drill or screwdriver. If tightening doesn’t work, replacing the screws with slightly larger ones might solve the issue.
**Stuck Doors**
When your door gets stuck, it’s often due to swelling from humidity or wear. Look for signs of friction, such as scratches or paint marks, along the edges or bottom of the door. For minor issues near the hinges, sand or plane these areas while the door remains hung. However, if the problem lies at the bottom, you’ll need to remove the door from its hinges and work on it on a stable surface.
**Squeaky Hinges**
Hinges making noise? A quick fix involves using a silicone-based lubricant. Spray it directly onto the hinge pins or the latch mechanism, then gently move the door back and forth to distribute the lubricant evenly. Wipe away any excess oil to prevent dirt buildup. This should eliminate the squeak almost instantly.
**Misaligned Locks**
Improper installation can cause the latch to miss the strike plate entirely. To correct minor misalignments, gently file the strike plate’s opening to allow the latch to fit properly. For more severe cases, you’ll need to adjust the strike plate's position. To determine the correct alignment, lightly mark the latch with a colored pencil, close the door, and observe where the marks appear. Chisel the strike plate’s cavity accordingly and reinstall it in its new spot.
**Time for a Fresh Start?**
If you’re considering upgrading your doors, browse our extensive range of internal doors at Leader Doors for ideas and inspiration. Whether you’re looking for classic designs or modern styles, we have options to suit every home.
Remember, maintaining your doors not only keeps them functional but also enhances the overall aesthetics of your space. With these tips, you can keep your doors in top condition without much hassle.